Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1976 Honda CB550F · Engine Buying guide
A service filter, a gasket for an opened joint and a measured piston replacement are different purchases. Start with diagnosis and the work planned, then count the individual pieces and compare the sets available.
Stock-type paper oil filterReplacement element for the original filter housing; spring, washers and O-rings are separate.Voir la pièce
Nine-piece engine oil seal kitCB550 seal kit covering listed clutch, gearshift, crankshaft, shaft and tach-drive sealing points.Voir la pièce
Standard 58.5 mm piston kitOne piston, rings, pin and two clips per kit. Four kits cover all four pistons.Voir la pièce
Pièces connexes : Athena overhaul gasket set · Athena top-end gasket set
The linked Athena overhaul and top-end sets offer different starting points for gasket work. Compare their contents with the joints being opened, then check which oil seals need attention. The nine-piece seal kit is a separate product; its contents should be matched to the repair rather than assumed part of a gasket order.
When ordering drivetrain pieces, identify their location first. Cam-drive supports belong to the valve-timing system; the primary chain and its dampers are internal engine parts. Rear-chain adjusters work at the wheel. Broad category placement does not make those three groups interchangeable or identify the cause of engine noise.
Each 58.5 mm kit contains one piston, its rings, a pin and two clips. For all four pistons, order four suitable kits after checking the measured cylinders; a single package is not a four-cylinder rebuild set.
Compare the joints and shafts being serviced with the package contents. Top-end and overhaul gasket sets are different choices from the nine-piece oil seal kit. Add individual parts only after checking what your selected set provides.
The featured paper element belongs to the original filter-housing arrangement. A spin-on conversion needs the specified cartridge for that conversion. Check the filter system installed on the engine before ordering an element or its service hardware.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.