VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB550F Supersport — Guidon et commandes

Finish the cockpit on your 1976 Honda CB550F with handlebar clamps and stock-type rubber grips matched to the installed controls. Compare the 7/8-inch bar application, mounting arrangement and closed grip ends before choosing parts for an original-style or altered setup.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips end detail 53165-342-670

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670

$17.95 USD
02-2423
Take your early-'70s Honda back to factory spec with these Honda OEM-Type Rubber Grips. Faithful replicas of the original factory grips, in black closed-end...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Honda CB550F handlebar stock type CB550F 1975-76 53100-390-620

1975-76 Honda CB550F Handlebar ~ Stock Type ~ CB550F 1975-76 ~ Replaces 53100-390-620

$64.95 USD
73-1097
Replace your CB550F handlebar with this Stock Type Handlebar for the CB550F (1975-76), Chrome. The holes are pre-cut for routing the wiring from the...
Comparer

1976 Honda CB550F · Handlebar clamps & grips Buying guide

Fit the cockpit pieces around your existing controls

The black clamp set and replica grips address different parts of the handlebar. Match the mounts and bar diameter first, then compare grip length, throttle sleeve and any accessories that require open bar ends.

Parts to consider

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black 7/8-inch clamp setStock-style clamps with CB550F application. Mounting hardware is a separate purchase.Voir la pièce Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670 Black closed-end replica grips135 mm rubber grips for 7/8-inch bars. References 53165-342-670 / 53166-342-670.Voir la pièce

Compare the mounts as well as the bar diameter

The clamp set is listed for the CB550F and 7/8-inch handlebars. Compare the fitted lower mount and upper bridge, particularly where risers or front-end parts have been changed. Inspect the existing fasteners separately; the product points to separate mounting hardware rather than a complete fastener package included with the clamps.

Check the grip fit within the finished cockpit

The rubber grips have closed ends and a stated 135 mm length. Compare those details with the throttle sleeve, switch housings and bar-end accessories. Different handlebars can also change switch position, wiring and cable routing; check the completed control arrangement and full steering movement before finishing the restoration.

Handlebar Clamps & Grips FAQs

Are the grips genuine Honda stock?

They are factory-style replicas in black rubber, with closed ends, 135 mm length and a 7/8-inch handlebar application. The replacement references are 53165-342-670 and 53166-342-670. They are not identified as Honda-branded genuine parts.

Do the black clamps include mounting bolts?

The product identifies a separate mounting hardware purchase. Inspect the hardware already fitted and confirm the upper bridge arrangement before ordering the clamps and any fasteners needed for your setup.

Can I retain bar-end mirrors with these grips?

Compare the mirror mounting method and required bar-end access first. These grips have closed ends, so an accessory needing an open end needs its compatibility checked. Confirm throttle-side clearance as well as mirror mounting before choosing the grip design.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB550F Supersport

Votre panier

×