Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1976 Honda CB550F · Fuel System Buying guide
The year narrows the application, while the installed tank, carburetors and intake arrangement determine the details. Start by separating a fuel leak from worn intake rubbers or an overdue air-filter replacement.
F-model carburetor rebuild kitOne-carb kit with bowl and top gaskets, float valve, #38 pilot jet and D274 needle.Voir la pièce
Stock airbox replacement elementFor the listed CB550F airbox; replaces reference 17210-390-003.Voir la pièce
CB550F fuel tapOn, off and reserve functions; replacement reference 16950-374-671.Voir la pièce
Pièces connexes : Four carburetor holders · Fuel-connector and bowl-drain seals · Throttle pull cable
A bowl gasket seals a different joint from a connector-tube O-ring or drain seal. The linked 12-piece kit supplies eight O-rings for the four fuel-connector tubes and four bowl-drain seals. Choose that kit for those locations rather than expecting it to replace the bowl-perimeter gaskets.
The stock element goes in the original airbox; a clamp-on pod filter is a different intake arrangement. If the airbox, carburetors or exhaust have been changed, compare the fitted parts and existing jetting before choosing replacements. A new filter alone does not establish which jet size the motorcycle needs.
No. The F-model rebuild kit services one carburetor. A complete four-carburetor rebuild needs four of these kits; a limited repair may need fewer. The fuel-connector seal kit is packaged differently, so count its contents separately.
Also compare the tap reference and the tank connection. The featured tap replaces 16950-374-671, while another listed tap has M20 × 1.5 threads and a different reference. Those details do not establish that the two taps are interchangeable.
The featured stock-type filter is an element for the original CB550F airbox. Individual pods clamp to compatible carburetor inlets and are not the same part. Check which intake arrangement is fitted before ordering.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.