Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Carb Float Needle ~ Replaces 16155-413-751

$8.95 USD
48-5011
Replace your DOHC CB float needle (only) with this Float Needle, replacing OEM #16155-413-751.Key Features• Float needle (only)• Replaces OEM #16155-413-751• Honda part name:...

Honda CB Tach Drive Plug Block Off w O-Ring

$22.95 USD
73-0884
Block off your tach drive cleanly with this Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable...

Honda CB750 / CB650 Rear Friction Shoe Set ~ Replaces 06430-393-405

$42.95 USD
29-3121
Replace your SOHC or DOHC CB750 rear brake shoes with this Brake Shoe Set of 2, replacing OEM #06430-393-405. Broad fitment across the SOHC...

Honda CB Spark Plug Cap ~ XD05F

$10.49 USD
23-3119
Replace your spark plug caps with this Spark Plug Cap, XD05F type. Two required per CB750. Key Features• Spark plug cap, XD05F• 2 required...

Honda CB Starter Clutch Diode ~ Replaces 31700-124-003

$12.88 USD
24-2044
Replace your starter clutch diode with this Stator Clutch Diode/Rectifier, replacing OEM #31700-124-003 / #31700-166-008. Exceptionally broad fitment across the SOHC and DOHC CB750...

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...

Honda CB Tappet Adjuster Screw & Nut Set ~ Replaces 90012-426-000

$4.61 USD
49-0784
Replace your tappet adjuster screws and nuts with this Tappet Adjuster Screw & Nut Set. Each set includes one tappet adjuster screw and one...

Honda CB Replacement Alternator Brush Set ~ Replaces 31124-MG5-000

$34.95 USD
24-2001
Replace your DOHC CB's alternator brushes with this Replacement Alternator Brush Set of 2 with clip mounts. 18mm x 5mm x 4.5mm, for Honda...
Nouveau
Épuisé
Honda CB1100 CB1000 CB900 CB750 oil filter pack of 5 15410-426-010

Honda CB Oil Filter Pack of 5 (Best Deal!) ~ Replaces 15410-426-010

$27.95 USD
15-0025
Keep your engine properly protected with this Pack of 5 Stock Type Oil Filter Elements, designed as direct replacements for the original Honda paper...

Honda CB Float Bowl Drain Screw O-Rings Pk/4

$5.80 USD
48-0792
Replace your float bowl drain screw O-rings with this Float Bowl Drain Screw O-Rings 4-Pack.Key Features• Float bowl drain screw O-rings• 4 per packFitment...

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...

Honda CB Carb Float ~ Replaces 16013-413-851

$27.95 USD
20-6507
Replace your 1980+ DOHC CB carb float with this Carb Float with Pin, replacing OEM #16013-413-851. Broad fitment across the 1980-82 CB750 family, CB750SC...

Honda CB Gear Change Lever with Rubber

$23.05 USD
19-0070
Replace your gear change lever with this Gear Change Lever with Rubber, chrome-plated steel. Replaces the original OEM lever but with more toe-to-engine-case clearance...

Honda CB Front Fuel Tank Holder Rubber ~ Replaces 17611-425-000

$7.87 USD
02-6551
Keep your fuel tank snugly mounted at the front with this Front Fuel Tank Holder Rubber, a direct replacement for OEM #17611-425-000. Fits the...

Honda CB750 / CB650 / CB550 Clutch Friction Plate SOHC #2 ~ Replaces 22202-392-000

$10.95 USD
39-1090
Replace your SOHC CB clutch friction plate #2 with this Clutch Friction Plate #2, replacing OEM #22202-392-000 / #22202-371-000.1 piece required per bike on...

Honda CB900 / CB750 / CB650 / CB550 Fork Seals

$21.95 USD
27-1028
Replace your DOHC Supersport or Nighthawk fork seals with this Fork Seal Set, 37 x 50 x 11mm. Made in Japan by OEM supplier.Key...

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...

Honda CB750 / CB700 / CB650 / CB550 Brake Cam Dust Seal ~ Replaces 43134-300-000

$3.50 USD
73-0938
Replace your brake cam dust seal with this Brake Cam Dust Seal, replacing OEM #43134-300-000.Key Features• Brake cam dust seal• Replaces OEM #43134-300-000• Honda...

Honda CB Tail Light Cover Screws ~ Replaces 93500-04055-4J

$4.69 USD
49-0145
Replace your tail light lens screws with this Tail Light Lens Screws Pack of 10, replacing OEM #93500-04055-4J.Key Features• Tail light lens screws• 10...
Épuisé
Honda CB750 CB900 CB1100 CB650 black hand lever 53175-MA5-671

Honda CB Black Hand Lever ~ Replaces 53175-MA5-671

$9.95 USD
08-0085
Choose a blacked-out alternative to the chrome 07-9995 brake lever with this Black Brake Lever. Replaces OEM #53175-MA5-671 / #53175-MA6-016 with the same broad...
Épuisé
Honda CB1100 CB1000 CB900 CB750 CB700 ignition coil 30500-422-003

Honda CB Ignition Coil ~ Replaces 30500-422-003

$64.95 USD
17-6803
Replace your DOHC CB's ignition coil with this Replacement Ignition Coil, replacing OEM #30500-422-003 / #30500-422-013. Broad fitment across the 1979-82 CB750 family, CB750SC/CB700SC...

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...

1980-83 Honda CB900 / CB750 / CB650 Fork Cap O-Ring Set/2 ~ Replaces 91344-PC9-004

$2.95 USD
73-0915
Replace your fork cap O-rings with this Fork Cap O-Ring Set of 2, replacing OEM #91344-PC9-004.Key Features• Fork cap O-rings• Set of 2• Replaces...

Honda CB Brake Rod Joint Pin with Cotter Pin

$5.95 USD
73-0844
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...

1981-82 Honda CB650 / CB650C / CB650SC Carb Holder Set ~ Replaces 16211-460-770

$77.95 USD
73-0134
Replace your CB650 carb holders with this Carb Holder Set of 4. Replaces those old cracked or dried-up carb holders. Replaces OEM #16211-460-770 (qty...

Honda CB750 / CB650 / CB550 Performance Clutch Spring Kit

$34.95 USD
39-1501
Upgrade your DOHC CB clutch springs with this High Performance Clutch Spring Kit of 6 springs. Made in Japan.Key Features• High-performance clutch spring kit•...

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...

Honda CB Gas / Fuel Tank Filler Cap ~ Replaces 17620-460-067

$44.95 USD
65-6508
Replace your gas tank cap with this OEM Type Gas/Fuel Tank Cap with gasket and 2 keys, replacing OEM #17620-460-067.Key Features• OEM-type gas /...
Nouveau
Honda CB750 CB650 Honda rear wheel bearing retainer 41231-300-020

Honda CB750 / CB650 Genuine Honda Rear Wheel Bearing Retainer ~ OEM 41231-300-020

$49.95 USD
99-5388
Upgrade or restore your classic Honda motorcycle with this Genuine Honda Rear Wheel Bearing Retainer — precision‑engineered and made in Japan. This authentic OEM...

Honda CB Caliper Bleed Screw Rubber Cap (Pk/10) ~ Replaces 45108-425-003

$11.95 USD
29-0500
Stock up on caliper bleed screw rubber caps with this Brake Caliper Bleed Screw Rubber Cap 10-pack. Universal type for series 1, 3, 4,...

Honda CB900 / CB750 / CB650 / CB550 Fork Dust Seal Set

$25.95 USD
27-1050
Replace your DOHC Supersport / Nighthawk fork dust seals with this Fork Dust Seal Set of 2. OEM-quality parts made in Japan.Key Features• Fork...
Épuisé
Honda CB1100 CB1000 CB900 CB750 CB700 starter solenoid switch assembly

Honda CB Starter Solenoid Switch Assembly

$44.95 USD
24-2004
Replace your DOHC CB's starter solenoid with this Starter Solenoid Switch Assembly, including a four-gang plug, 30-amp fuse with rubber holder, and cable attachment.The...

1976-82 Honda CB750 / CB650 Rear Wheel Damper Rubber ~ Replaces 41241-300-050

$19.95 USD
73-1054
Replace your rear wheel drive damper rubbers with this Rear Wheel Drive Damper Rubber, replacing OEM #41241-300-050. These fit between the rear wheel sprocket...

Honda CB Stock Type Gearshift Lever Rubber ~ Replaces 24781-419-000

$7.50 USD
73-0838
Replace your gearshift lever rubber with this Stock Type Gearshift Lever Rubber, replacing OEM #24781-419-000.Key Features• Stock-type gearshift lever rubber• Replaces OEM #24781-419-000• Honda...

Honda CB900 / CB750 / CB650 / CB450 Footrest Rubbers ~ Replaces 50661-425-670

$24.95 USD
73-0912
Replace your footrest rubbers with this Footrest Rubbers Set of 2, OEM #50661-425-670.Key Features• Footrest rubbers• Set of 2• OEM #50661-425-670• Honda part name:...

Honda CB750 / CB650 / CB350 Oil Filter Bolt ~ Replaces 15420-333-000

$24.95 USD
15-3022
Fit the CB750F or CB650 oil filter bolt with this Oil Filter Bolt, replacing OEM #15420-333-000.Key Features• Oil filter bolt for stock filter and...

Honda CB750 / CB650 / CB450 / CB400 Front Caliper Bleed Screw ~ Replaces 45224-413-003

$8.95 USD
73-0995
Replace your front caliper bleed screw with this Front Brake Caliper Bleed Screw, replacing OEM #45224-413-003.Key Features• Front brake caliper bleed screw• Replaces OEM...

Honda CB Turn Signal Lamp Gasket ~ Replaces 33406-377-671

$4.61 USD
11-2084
Replace the gasket on your turn signal with this Turn Signal Lamp Gasket, replacing OEM #33406-377-671. Pairs with our signal lamps #11-2114 and #11-2149...

Honda CB Master Cylinder Rubber Boot ~ Replaces 45522-422-000

$8.95 USD
73-0094
Replace your master cylinder rubber boot with this Master Cylinder Rubber Boot, replacing OEM #45522-422-000.Key Features• Master cylinder rubber boot• Replaces OEM #45522-422-000• Honda...
Épuisé
Honda CB750 CB900 CB650 cam cover seal 90541-425-000

Honda CB750 / CB900 / CB650 Cam Cover Seal

$11.95 USD
01-0116
Keep oil where it belongs with this Cam Cover Seal, a direct replacement for OEM #90541-425-000. Fits a wide range of late-'70s through early-'80s...

Honda CB Clutch Lever Brake Light Switch ~ Replaces 35330-413-003

$15.95 USD
29-7029
Replace your front clutch lever safety stop switch with this Clutch Lever Stop Switch, replacing OEM #35330-413-003. This is the switch that allows the...

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...

Parts and fitment guide for your 1982 CB650SC

This collection brings together listed repair and maintenance parts for the 1982 Honda CB650SC Nighthawk. Confirm the exact model and fitted component; a shared CB650 name does not make every Standard, Custom and Nighthawk part interchangeable.

Browse by repair

Selected parts for the 1982 CB650SC

Check each listing for model fitment, dimensions and included quantities.

  • Stock air filter — for the original airbox on the listed 1980–82 applications.
  • Oil filter — stock-type paper element; housing seals and hardware are separate.
  • Oil-filter washers — pack of five washers for the listed original-type paper-filter assembly.

Identify your CB650SC (1982)

Match your motorcycle to its original-market documentation.

  • Identifiers to compare — complete frame/VIN and engine markings

Treat the merchant model chart as a reference, not a confirmed production cutoff.

View the model reference chart

For help locating identifiers, use our Honda CB model guide.

Keep the 1982 Nighthawk application distinct

Carb kit 48-1422 lists the early CB650SC and supplies a #118 main jet, #35 pilot jet, needle components and seals. Those are kit contents, not confirmed jetting for every installed carburetor. Kit 48-1400 separately lists the 1983–85 Nighthawk.

Fitment questions

Are Standard and Nighthawk fork seals the same in 1982? Their listings differ: 27-1007 gives 35 × 48 × 10.5/11mm for the Standard CB650, while 27-1028 gives 37 × 50 × 11mm for the 1982 CB650SC. These are replacement-seal dimensions. Compare the fitted fork assembly before ordering.

Does the accelerator-pump listing have an extra fitment condition? Yes. Diaphragm kit 20-9040 requires an 89mm end-to-end pin for its 1982 CB650SC application. Compare the old assembly and pin length; a shared model listing alone does not satisfy that measurement condition.

Related CB650SC collections

Need help checking a part? Contact VintageCB750 with the model year, original market, frame and engine markings, and component photos.

Votre panier

×