1982 Honda CB650SC Nighthawk — Pignons et couronnes
The reviewed sprocket-related choice for the 1982 CB650SC is the retaining plate with two bolts. Inspect that hardware when assessing the front sprocket. Its presence in the category does not establish an available sprocket tooth count or the length needed for an external replacement chain.
1982 Honda CB650SC Nighthawk · Front Sprocket Retainers Buying guide
Inspect the plate and both fasteners at the front sprocket
The plate references 23811-292-000 and comes with two bolts. Match the retention arrangement on the motorcycle, especially where a different sprocket or earlier repair may have changed the fastening pieces.
The set supplies the front sprocket lock plate and two bolts. Choose it to renew that hardware after comparing the actual assembly. It does not establish the tooth count, chain size or gearing needed for a separate sprocket purchase.
Check the surrounding assembly before refitting
Inspect the existing plate, fasteners and sprocket-retaining arrangement during service. Use the correct procedure and tightening specification from the relevant manual rather than substituting generic hardware or inferring a method from the product photograph.
Front Sprocket Retainers questions
When should the front-sprocket lock plate be replaced?
Replace a plate that is bent, cracked, worn at the bolt holes or no longer locks securely. Inspect it when replacing the front sprocket and renew damaged retaining hardware as the repair requires.
Will it suit an aftermarket front sprocket?
Verify the sprocket’s retention design and the required plate and fasteners. The model application is a useful starting point, but does not prove compatibility with every substituted sprocket.
What needs checking before the sprocket cover is closed?
Confirm sprocket orientation, chain alignment, bolt tightening and the locking method against the Honda procedure before closing the cover and operating the motorcycle.
Vous ne savez pas quelle pièce choisir ?
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.