Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Câbles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Tachometer Cable ~ Replaces 37260-300-000

$21.46 USD
51-2402
Replace your CB tachometer cable with this Tachometer Cable in black, replacing OEM #37260-300-000 / #37260-449-840. Made in Japan.Key Features• Tachometer cable, black• Replaces...

Honda CB Tach Drive Plug Block Off w O-Ring

$22.95 USD
73-0884
Block off your tach drive cleanly with this Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable...

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...

1981-82 Honda CB900C / CB650SC Speedometer Cable ~ Replaces 44830-461-770

$34.95 USD
73-0200
Replace your CB900C or CB650SC speedometer cable with this Speedometer Cable, replacing OEM #44830-461-770. Length 42.5". Made in Japan.Key Features• Speedometer cable• 42.5" length•...

Honda CB Tach Drive Plug Block Off ~ Black ~ Joker Machine

$39.95 USD
73-1075
Block off your tach drive cleanly with this Joker Machine Brand Black Tach Drive Plug (Block Off). This plug is generally used when the...

1982 Honda CB650SC Nighthawk · Speedometer & Tachometer Cables Buying guide

Trace the cable route and match its instrument

The speedometer cable references 44830-461-770 and is 42.5 inches long. The tachometer cable references 37260-300-000 and 37260-449-840. Keep those identities tied to the corresponding gauge and drive when selecting replacements.

Use the stated speedometer length with the actual route

The 42.5-inch product explicitly includes the 1982 CB650SC. Compare the fitted wheel drive, instrument connection and route before ordering. A cable selected for a different CB650 model should not be assumed equivalent from appearance alone.

Distinguish tachometer removal from cable renewal

Replacing a cable and removing a mechanical instrument call for different parts. If a cable is being removed, identify the required closure, seal and retainer from the product instructions. A speedometer wheel-drive closure serves a different fitting from a tachometer-drive plug; compare each interface separately.

Speedometer & Tachometer Cables questions

What length is specified for the speedometer replacement?

42.5 inches. Compare that length and reference 44830-461-770 with the actual routing and connections before buying for relocated instruments.

Why can the speedometer still jump or make noise with the replacement cable?

Check the wheel drive and instrument for wear or binding, and confirm the cable follows a route without sharp bends or tension with both ends fully seated. The replacement cable does not repair a worn drive or gauge; use the cable maker’s lubrication guidance.

When is a tachometer-drive block-off relevant?

A block-off is relevant when the mechanical tachometer cable is no longer used and its opening needs sealing. Product 73-0884 includes an O-ring and specifies an approximately 15 mm cable-end fitting with a 10.5 mm groove and screw retention. Follow its fitting instructions rather than assuming which internal drive parts can remain.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×