VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB650SC Nighthawk — Alimentation en carburant

The 1982 CB650SC fuel selection has a specific carburetor kit, an M20-thread tank valve and a four-piece holder set. Check the carburetors and tank actually installed before ordering. These details distinguish the repair from parts chosen for another CB650 year or a custom intake arrangement.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Épuisé
Honda CB throttle sleeve 53141-300-010

Honda CB Throttle Sleeve ~ Replaces 53141-300-010

$9.95 USD
02-2462
Refresh the throttle feel on your Honda with this Nylon Throttle Sleeve, a replacement for OEM Ref. #53141-300-010 with exceptionally broad fitment across the...
Honda CB1100 CB1000 CB900 CB750 float bowl gasket

Honda CB1100/CB1000/CB900/CB750 Float Bowl Gasket

$9.50 USD
20-8031
Replace your DOHC CB float bowl gasket with this Float Bowl Gasket (O-ring). Broad fitment across the 1979-82 CB750 family, CB750SC Nighthawk, CB900/CB1000/CB1100, CB650...
Honda CB750 CB650 CB450 carb pump diaphragm 16021-393-004

Honda CB750 / CB650 / CB450 Carb Pump Diaphragm ~ Replaces 16021-393-004

$27.95 USD
20-9040
Rebuild your Keihin carb's accelerator pump with this Carb Pump Diaphragm, replacing OEM #16021-393-004 / #16021-393-014 / #16021-MC9-771. Kit contains 1 diaphragm with rod...
Honda CB1100 CB1000 CB900 CB750 CB650 fuel petcock 16950-461-751

1982-83 Honda CB1100 / CB1000 / CB900 / CB750 / CB650 Fuel Petcock ~ Replaces 16950-461-751

$59.95 USD
20-8045
Replace your 1982+ DOHC CB's fuel petcock with this Fuel Petcock, replacing OEM #16950-461-751 with M20 x 1.0 threads. Please verify the thread size...
Honda CB1000 CB900 CB750 CB650 throttle cable push 17920-425-030

Honda CB1000 / CB900 / CB750 / CB650 Throttle Cable ~ Push ~ Replaces 17920-425-030

$25.95 USD
51-2513
Replace your DOHC CB throttle push cable with this Throttle Cable "Push Type", replacing OEM #17920-425-030.Key Features• Throttle cable, push type• Replaces OEM #17920-425-030•...
Honda CB1100 CB1000 CB900 CB750 CB700 carb float needle 16155-413-751

Honda CB Carb Float Needle ~ Replaces 16155-413-751

$8.95 USD
48-5011
Replace your DOHC CB float needle (only) with this Float Needle, replacing OEM #16155-413-751.Key Features• Float needle (only)• Replaces OEM #16155-413-751• Honda part name:...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw o-rings pk 4

Honda CB Float Bowl Drain Screw O-Rings Pk/4

$5.80 USD
48-0792
Replace your float bowl drain screw O-rings with this Float Bowl Drain Screw O-Rings 4-Pack.Key Features• Float bowl drain screw O-rings• 4 per packFitment...
Honda CB1100 CB1000 CB900 CB750 CB650 carb float 16013-413-851

Honda CB Carb Float ~ Replaces 16013-413-851

$27.95 USD
20-6507
Replace your 1980+ DOHC CB carb float with this Carb Float with Pin, replacing OEM #16013-413-851. Broad fitment across the 1980-82 CB750 family, CB750SC...
Honda CB front fuel tank holder rubber 17611-425-000

Honda CB Front Fuel Tank Holder Rubber ~ Replaces 17611-425-000

$7.87 USD
02-6551
Keep your fuel tank snugly mounted at the front with this Front Fuel Tank Holder Rubber, a direct replacement for OEM #17611-425-000. Fits the...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB650 CB650C CB650SC carb holder set 16211-460-770

1981-82 Honda CB650 / CB650C / CB650SC Carb Holder Set ~ Replaces 16211-460-770

$77.95 USD
73-0134
Replace your CB650 carb holders with this Carb Holder Set of 4. Replaces those old cracked or dried-up carb holders. Replaces OEM #16211-460-770 (qty...
Honda CB750C CB750SC CB900C CB1000C gas fuel tank cap 17620-460-067

Honda CB Gas / Fuel Tank Filler Cap ~ Replaces 17620-460-067

$44.95 USD
65-6508
Replace your gas tank cap with this OEM Type Gas/Fuel Tank Cap with gasket and 2 keys, replacing OEM #17620-460-067.Key Features• OEM-type gas /...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB1100 CB1000 CB900 carb felt throttle and choke shaft seal set 12

Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12

$32.95 USD
33-0044
Replace worn or missing felt throttle and choke shaft seals during carburetor service on compatible vintage Honda CB models. These felt seals are used...
Honda CB1000 CB900 CB750 pilot jet set size 35 (pk 4) 99103-GY6-0350

Honda CB Pilot Jet Set ~ Size #35 (Pk/4) ~ Replaces 99103-GY6-0350

$14.95 USD
73-1004
Refresh your low-speed performance with this Pilot Jet Set of 4 in size #35, replacing OEM #99103-GY6-0350.Pilot jets handle your idle and low-speed operation...
Honda CB1100 CB1000 CB900 CB750 CB650 carburetor cap screw set 8

Honda CB Carburetor Cap Screw Set/8

$5.80 USD
73-0100
Refresh your DOHC carb cap screws with this Carburetor Cap Screw Set of 8 with metal washers.Key Features• Carburetor cap screw set, 8 pieces•...
Honda CB650 CB650C CB650SC stock type air filter 17211-460-000

1980-82 Honda CB650 / CB650C / CB650SC Stock Type Air Filter ~ Replaces 17211-460-000

$17.41 USD
15-0063
Replace your CB650 stock air filter with this Stock-Type Air Filter, replacing OEM #17211-460-000.Key Features• Stock-type air filter• Replaces OEM #17211-460-000• Honda part name:...
Honda CB650SC carb rebuild kit

1982 Honda CB650SC Carb Rebuild Kit

$24.95 USD
48-1422
Rebuild your CB650SC Nighthawk carb with this Carb Rebuild Kit. Contains float bowl gasket, float needle, main jet (#118), jet holder, pilot jet (#35),...
Honda CB1100 CB1000 Keihin pd carb felt throttle shaft seal set 6

Honda CB Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$18.95 USD
33-0043
Replace worn or missing felt throttle shaft seals on Keihin PD carburetors. These felt seals are used during carburetor service or restoration to help...
Comparer

1982 Honda CB650SC Nighthawk · Fuel-System Parts Buying guide

Confirm carburetor identity and tank thread before buying

The rebuild kit covers one carburetor with listed #118 main and #35 pilot jets. The petcock uses M20 × 1.0 threads, and the holder set requires separate matching clamps. Compare each location independently.

Parts to consider

1982 Honda CB650SC Carb Rebuild Kit 1982 Nighthawk carb kitOne-carburetor kit with #118 main jet, #35 pilot jet, float needle, bowl gasket and eleven O-rings.Voir la pièce 1982-83 Honda CB1100 / CB1000 / CB900 / CB750 / CB650 Fuel Petcock ~ Replaces 16950-461-751 M20 tank petcockPetcock with M20 × 1.0 tank threads, reference 16950-461-751.Voir la pièce 1981-82 Honda CB650 / CB650C / CB650SC Carb Holder Set ~ Replaces 16211-460-770 Four carb holdersFour holders replacing 16211-460-770. Eight matching clamps are specified separately.Voir la pièce

Read the kit contents before counting carburetors

The selected package includes the bowl gasket, float needle, main and pilot jets, jet-holder and needle parts, air screw with spring and eleven O-rings. One kit serves one carburetor. Check the actual repair scope and fitted jet specifications before choosing the number of packages.

Check a changed tank or intake separately

The petcock’s M20 × 1.0 fitting must match the tank in use. The holders replace 16211-460-770 and list separate clamps. A frame-year match cannot verify a swapped tank or carburetor bank, so compare those assemblies before ordering their connecting parts.

Fuel-System Parts questions

Are the jets supplied in the rebuild kit automatically the correct settings?

Compare the fitted carburetor identification, existing metering parts and Honda specification before installing the supplied jets. A kit’s model application and package contents do not establish the right calibration for a modified intake or exhaust.

Are the holder clamps included?

The set supplies four holders. The notes specify separate 50–52mm band clamps or the identified gear-clamp alternative, with eight clamps for the described arrangement.

Will this petcock suit an earlier CB650 tank?

Check the tank fitting directly. This valve requires M20 × 1.0 threads; another year’s or aftermarket tank can use a different connection despite fitting the frame.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB650SC Nighthawk

Votre panier

×