1974 Honda CB360G Fork Seals, Boots & Caps

Préciser la sous-catégorie

Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD

Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB450 / CB400 / CB360 Fork Seals

$21.95 USD

Replace your CB400 or CB360 fork seals with this Fork Seal Set, 33 x 46 x 11mm. Made in Japan by OEM supplier.Key Features•...

Honda CB450 CB400 CB360 CL360K0 fork dust boot set 91254-413-881

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

$15.95 USD

Refresh your fork seal dust boots with this Fork Seal Dust Boots Set of 2. 33mm size. Replaces OEM #91254-413-881.Key Features• Fork seal dust...

Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD

This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...

Honda CB400 CB360 CB200 CB175 fork tube cap bolt with o-ring 94605-27101

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461

$17.95 USD

This aftermarket fork tube cap bolt with matching O-ring replaces Honda OEM #94605-27101 on compatible Honda CB front forks. It threads into the top...

Comparer

1974 Honda CB360G · Fork Seals, Boots & Caps Buying guide

Match the seal and cap to the fork fitted

The fork seal set measures 33 × 46 × 11mm, the dust boots are a 33mm pair, and the replacement cap uses a 27 × 1.0mm thread. These measurements identify different features.

Parts to consider

Fork seal setJapanese-made replacement fork seals measuring 33 × 46 × 11mm, with CB360G application.Voir la pièce

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

Fork dust-boot pairSet of two 33mm fork dust boots, replacing reference 91254-413-881.Voir la pièce

Pièces connexes : Fork cap bolt with O-ring, sold individually

Inspect more than the leaking seal

The oil seal set is listed for the CB360G and made in Japan. Check the fork’s sealing surfaces and nearby components during service, using the Honda manual for the procedure. A damaged surface should not be assumed cured by a new seal alone.

Avoid buying the cap seal twice

The linked aftermarket fork cap bolt includes a matching O-ring and has a 17mm hex. The product is sold each. For a two-cap refresh, order two only after confirming the thread and the actual fork arrangement on the motorcycle.

Fork Seals, Boots & Caps questions

What size are the fork seals?

The replacement oil seal set is specified as 33 × 46 × 11mm. Match that specification to the fitted forks if their history is uncertain; the dust boots have a separate 33mm size description.

Do I need separate O-rings with the new cap bolts?

Each replacement cap bolt includes its matching O-ring. Separate cap O-rings may suit a seal-only repair, but are not automatically needed when replacing a complete cap-and-O-ring assembly.

How many dust boots and cap bolts are supplied?

The dust-boot package contains two. The cap bolt with its O-ring is sold individually. Keep those package quantities separate when ordering parts for one fork leg or both.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 1974 Honda CB360G

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces

Magasiner par catégorie