VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB360G — Alimentation en carburant

The CB360G twin uses two constant-vacuum carburetors, one for each cylinder. Separate fuel supply, engine-side intake sealing and slide-diaphragm work when planning a repair. A paired holder or diaphragm package and a single-carb rebuild kit have very different ordering quantities.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Solde
Honda CB750 CB550 CB500 CB400 CB360 gas cap rubber seal 17534-323-300

Honda CB Gas Cap Rubber Seal ~ Replaces 17534-323-300

$8.19 $7.95 USD
You save $0.24
20-0039
Replace your mid-'70s Honda gas cap rubber seal with this Gas Cap Rubber Seal, replacing OEM #17534-323-300. Broad fitment across the SOHC CB750K, CB500/CB550...
Épuisé
Honda CB throttle sleeve 53141-300-010

Honda CB Throttle Sleeve ~ Replaces 53141-300-010

$9.95 USD
02-2462
Refresh the throttle feel on your Honda with this Nylon Throttle Sleeve, a replacement for OEM Ref. #53141-300-010 with exceptionally broad fitment across the...
Honda CB750 CB550 CB500 CB450 type filler chrome cap 17510-323-310

Honda CB OEM Type Filler Chrome Cap ~ Replaces 17510-323-310

$49.95 USD
20-0045
Replace your OEM-type filler cap with this OEM Type Gas/Fuel Tank Chrome Cap, including gasket and hinge pin with E-clip for easy installation. Replaces...
Honda CB750 CB550 CB500 CB450 CB400 gas fuel tank cap latch assembly

Honda CB Gas/Fuel Tank Cap Latch Assembly

$44.95 USD
20-0083
Replace your gas cap latch with this Gas/Fuel Tank Cap Latch Assembly. Includes a chrome latch, return spring, latch mounting pin, and C-clip.Key Features•...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Nouveau
Honda CB550 CB500 CB360 rear fuel tank holder rubber 17613-286-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000

$9.95 USD
12-0133
Restore proper rear fuel tank mounting on your mid-'70s twin or four with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000• Honda part name: Bolt,...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000• Honda part name: Spring,...
Honda CB450 CB360 CB350 CL350K0 CL350K2 fuel petcock 16950-292-000

Honda CB Fuel Petcock ~ Replaces 16950-292-000

$34.95 USD
29-0542
Replace your CB450, CL450, CB350, or CB360 fuel petcock with this Fuel Petcock, replacing OEM #16950-292-000 with M16 x 1.5 threads. Please verify the...
Honda CB750 CB550 CB450 CB400F fuel tank cap latch 17510-323-310

Honda CB Matte Black Fuel Tank Cap with Latch ~ Replaces 17510-323-310

$69.95 USD
07-9967
Restore your classic Honda's tank with a factory-look matte-black finish using this Matte Black OEM-Type Fuel Tank Cap with Latch Assembly. A direct replacement...
Honda CB750 CB550 CB400F CB450 CB360 tank cap latch assembly black

Honda CB Gas/Fuel Tank Cap Latch Assembly ~ Black

$29.95 USD
01-9934
Replace a broken, missing, or worn-out fuel cap latch with this Gas/Fuel Tank Cap Latch Assembly in black. Includes the black latch, return spring,...
Universal motorcycle carburetor synchronizer vacuum gauge 2 carb synchronizer

Universal Motorcycle Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

$54.95 USD
37-0003
Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki,...
Voir les détails
Nouveau
Honda CB360G CB360K CB360T carb holder set 16211-369-000

1974-76 Honda CB360G / CB360K / CB360T Carb Holder Set ~ Replaces 16211-369-000

$54.95 USD
48-1459
Replace your CB360 carb holders with this Carb Holder Set of 2 with gaskets. Replaces OEM #16211-369-000 (qty 2) and #16229-369-000 (qty 2).Note: if...
Universal motorcycle 49mm chrome cap pod air filter

Universal Motorcycle 49mm Chrome Cap POD Air Filter

$24.95 USD
15-0034
49mm Chrome Cap POD Air Filter for custom or restoration work on classic Honda CB motorcycles. Measure the outside diameter of the carburetor inlet...
Voir les détails
Honda CB360 CL360 carb slide diaphragm rubber set 16022-369-004

1974-76 Honda CB360 / CL360 Carb Slide Diaphragm Rubber Set ~ Replaces 16022-369-004

$44.95 USD
48-1500
Replace your CB360 or CL360 carb slide diaphragm rubbers with this Carb Slide Diaphragm Rubbers Set. Includes 2 diaphragms (rubber portion only as shown)...
Nouveau
Honda CB360 CL360 carb rebuild kit

1974-76 Honda CB360 / CL360 Carb Rebuild Kit

$17.57 USD
48-1394
Rebuild your CB360 carb with this Carb Rebuild Kit.Note: each kit rebuilds one carb, order the quantity you require.Key Features• Carb rebuild kit• Rebuilds...
Honda CB750 CB550 joker machine black gas tank cap latch assembly

Honda CB Joker Machine Black Gas Tank Cap Latch Assembly

$79.95 USD
73-1157
Upgrade your fuel tank latch with the Joker Machine Custom Black Gas/Fuel Tank Cap Latch Assembly. Designed as a premium alternative to the discontinued...
Honda CB750 CB550 CB500 joker machine billet black flip-up gas cap

Honda CB Joker Machine Billet Black Flip-Up Gas Cap

$149.95 USD
73-1156
Joker Machine’s Custom Black Flip-Up Billet Gas Cap is a beautifully crafted upgrade to your original tank cap. CNC-machined from solid 1" thick billet...
Honda CB360 CL360 float needle and seat 16011-369-004

1974-76 Honda CB360 / CL360 Float Needle & Seat ~ Replaces 16011-369-004

$13.95 USD
48-1520
Replace your CB360 or CL360 float needle and seat with this Float Needle & Seat, made in Japan, replacing OEM #16011-369-004.Key Features• Float needle...
Nouveau
Honda CB360 CL360 carb intake manifold 16211-369-000

1974-76 Honda CB360 / CL360 Carb Intake Manifold ~ Replaces 16211-369-000

$27.95 USD
48-1472
Replace a single CB360 or CL360 carb intake manifold with this Carb Intake Manifold, replacing OEM #16211-369-000.Note: this is for one holder, order the...
Honda CB500T CB450 CB360 CB350 slow pilot jet #35 99124-286-0351

Honda CB500T / CB450 / CB360 / CB350 Slow / Pilot Jet #35 ~ Replaces 99124-286-0351

$7.00 USD
48-1587
Restore clean idle and low-speed fuel metering with this aftermarket Keihin-style slow / pilot jet, size #35. It replaces Honda OEM #99124-286-0351 for the...
Comparer

1974 Honda CB360G · Fuel System Parts Buying guide

Work from the tank fitting to the two carburetors

Identify where the repair is needed before choosing parts. The petcock connection, engine-side carb holders and diaphragm rubbers each have their own fitment checks; none should be selected solely from the broad fuel-system label.

Parts to consider

Honda CB Fuel Petcock ~ Replaces 16950-292-000 M16 × 1.5 fuel petcockReplacement fuel tap with M16 × 1.5 threads and reference 16950-292-000. Check the tank fitting before ordering.Voir la pièce 1974-76 Honda CB360G / CB360K / CB360T Carb Holder Set ~ Replaces 16211-369-000 Pair of carb holders with gasketsTwo holders and two gaskets, replacing 16211-369-000 and 16229-369-000. Matching band clamps are a separate purchase.Voir la pièce 1974-76 Honda CB360 / CL360 Carb Slide Diaphragm Rubber Set ~ Replaces 16022-369-004 Carb slide diaphragm rubbersTwo diaphragm rubbers and two O-rings. Replaces the rubber portion of reference 16022-369-004, rather than complete slides.Voir la pièce

Keep package quantities separate

The carb-holder set contains two holders and two gaskets, while the diaphragm set contains two rubbers and two O-rings. A rebuild kit elsewhere in the range covers one carburetor. Count by the package description so that servicing both cylinders does not produce duplicated pairs or an incomplete order.

Check changes made over the years

A changed tank can alter the fuel-tap connection, while replacement carburetors can change intake and internal-part requirements. The featured petcock uses M16 × 1.5 threads. Identify those installed parts first, and treat pod-filter conversions as tuning work rather than assuming stock settings remain suitable.

Fuel System Parts questions

Does the original CB360G use one or two carburetors?

Honda specifies two constant-vacuum carburetors, one per cylinder. For a bike with replacement carburetors, identify those units before selecting internal kits, intake holders or tuning parts.

Does one carb-holder set cover both sides?

Yes. The featured set contains two holders and two gaskets. The required 46–49 mm band clamps are separate, so inspect the existing clamps before completing the order.

Will the petcock fit a replacement tank?

Only after checking the tank connection. This petcock uses M16 × 1.5 threads; compare that fitting and the available outlet clearance instead of relying on the CB360G model name.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB360G

Votre panier

×