Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Compte-tours et compteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Tachometer Cable ~ Replaces 37260-KB7-010

$15.26 USD
51-2406
Replace your CB tachometer cable with this Tachometer Cable in black, replacing OEM #37260-KB7-010 / #37260-438-000. Made in Japan. Cable length 24".Note: cable length...

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...

Custom Vintage Style Speedometer MPH

$99.95 USD
03-0760
Custom Vintage Style Speedo (MPH) - Mechanical speedometer ratio: 2240:60. Before ordering, confirm the drive ratio, cable or electrical connection, gauge diameter, and mounting...
Nouveau
Honda CB360 CL360 CL350K5 speedometer cable

1973-75 Honda CB360 / CL360 / CL350K5 Speedometer Cable

$20.27 USD
99-4883
Upgrade or restore your classic Honda motorcycle’s speedometer system with this replacement Speedometer Cable — designed to fit and replace multiple OEM part numbers,...

Custom Vintage Style Speedometer KPH

$99.95 USD
03-0761
Custom Vintage Style Speedo (KPH) - Mechanical speedometer 60 km/h = 1400 rpm Before ordering, confirm the drive ratio, cable or electrical connection, gauge...

1974 Honda CB360G · Instruments & Drive Parts Buying guide

Choose between a cable repair and a custom instrument

The tachometer cable is specified at 24 inches. The custom speedometers offer MPH or KPH displays, mechanical drive and LED illumination, with dimensional requirements that must suit the motorcycle’s actual instrument arrangement.

Preserve the distinction between instrument drives

A tachometer cable carries the engine-speed drive, while a speedometer reads road speed through its own drive arrangement. Compare the cable ends and routing before selecting a replacement. A new cable should not be assumed to correct a fault inside the instrument or drive.

Plan a custom gauge as an installation

Both featured speedometers are 85mm in diameter with 57mm mounting centers and require custom mounting. The MPH version uses a 2240:60 ratio; the KPH version states 60 km/h at 1,400 rpm. Verify the drive and illumination connections before ordering.

Instruments & Drive Parts questions

Will either custom speedometer bolt into the original mount?

The gauges are explicitly offered for custom mounting. Check the 85mm diameter, 57mm mounting centers, depth and available space, along with the cable connection and drive ratio, before choosing one.

Does LED illumination mean the speedometer is electronic?

No. Both featured speedometers use mechanical drive for the speed reading and LED illumination for lighting. The mechanical connection and the lighting wiring require separate checks against the installation.

How long is the replacement tachometer cable?

The black Japanese-made tachometer cable is specified at 24 inches. Measure the route and compare both ends on your CB360G, especially if the gauges or handlebars have been relocated.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×