VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB360G — Moteur

The 1974 CB360G uses Honda’s 356 cc overhead-cam twin and a six-speed gearbox. Build an engine order around the work actually needed: measured piston and cylinder condition, disturbed gasket joints, and worn valve-adjustment hardware each call for different parts.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Moteur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 front sprocket lock plate set 23811-292-000

Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000

$5.95 USD
49-0782
Replace your front sprocket lock plate with this Front Sprocket Lock Plate with 2 lock plate bolts. Always good to replace these when installing...
Honda CB750 CB650 CB550 tappet adjuster screw and nut set 90012-426-000

Honda CB Tappet Adjuster Screw & Nut Set ~ Replaces 90012-426-000

$4.61 USD
49-0784
Replace your tappet adjuster screws and nuts with this Tappet Adjuster Screw & Nut Set. Each set includes one tappet adjuster screw and one...
Épuisé
Honda CB valve tappet cover rocker cap 12361-300-000

Honda CB Valve Tappet Cover / Rocker Cap ~ Replaces 12361-300-000

$6.95 USD
01-9980
Dress up your Honda's top end with this Valve Tappet Cover (Rocker Cap), an aftermarket finned chrome-plated replacement for OEM #12361-300-000. Fits an exceptionally...
Honda CB350 CB360 exhaust valve 14721-286-305

Honda CB350 / CB360 Exhaust Valve ~ Replaces 14721-286-305

$19.95 USD
01-9954
Restore proper engine performance with this Exhaust Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part numbers...
Honda CB350 CB360 intake valve 14711-286-030

Honda CB350 / CB360 Intake Valve ~ Replaces 14711-286-030

$19.95 USD
01-9953
This intake valve is designed as a direct replacement for the original Honda component, matching OEM reference number 14711-286-030. It plays a key role...
Honda CB750 CB450 CB400 CB360 CB77 valve guide clip 12211-250-310

Honda CB Valve Guide Clip ~ Replaces 12211-250-310

$1.95 USD
73-0939
Replace your valve guide clip with this Valve Guide Clip, replacing OEM #12211-250-310.Sold each, order the quantity you require.Key Features• Valve guide clip• Replaces...
Honda CB360 CL360 standard piston ring set 3 13011-369-305

1974-76 Honda CB360 / CL360 Standard Piston Ring Set/3 ~ Replaces Honda OEM 13011-369-305

$11.50 USD
33-0038
This aftermarket standard piston ring set is for stock-bore Honda CB360 and CL360 engines using Honda OEM reference 13011-369-305. It helps restore compression during...
Nouveau
Honda CB360 CB350 CL350K0 CL350K2 clutch ball retainer 22860-286-000

Honda CB Clutch Ball Retainer ~ Replaces 22860-286-000

$16.95 USD
99-4850
Restore crisp clutch engagement and reliable function with this Clutch Ball Retainer — designed to replace OEM #22860‑286‑000 on a variety of classic Honda...
Honda CB750 CB550 drive chain adjuster screws black joker machine 90119-283-000

Honda CB Drive Chain Adjuster Screws ~ Black ~ Joker Machine ~ Replaces 90119-283-000

$59.95 USD
73-1059
Refresh your drive chain adjusters with these Joker Machine Brand Black Custom Type Drive Chain Adjuster Screws, set of 2, with gold-cadmium-plated nuts. Replaces...
Nouveau
Honda CB450 CB400 CB360 CB350 drive chain adjuster with nut and bolt 40543-471-000

Honda CB Drive Chain Adjuster with Nut & Bolt ~ Replaces 40543-471-000 / 40543-312-010

$24.95 USD
99-4856
Upgrade or restore your classic Honda motorcycle’s rear drive system with this Drive Chain Adjuster with Nut and Bolt — a quality replacement designed...
Honda CB500 CB450 CB400 CB360 CB350 cylinder head gasket 12909-428-003

Honda CB Cylinder Head Gasket ~ Replaces 12909-428-003

$2.95 USD
73-1186
Restore top-end sealing performance with this high-quality Cylinder Head Gasket. Designed to match OEM specifications, this gasket ensures a perfect fit and proper sealing...
Honda CB500 CB450 CB360 special oil filter rotor washer 90481-292-000

Honda CB Special Oil Filter Rotor Washer ~ Replaces 90481-292-000

$9.46 USD
29-7034
Replace your oil filter rotor washer with this Special Angled Oil Filter Rotor Washer (16mm), replacing OEM #90481-292-000.Key Features• Special angled oil filter rotor...
Honda CB360 CL360 Athena overhaul gasket set

1974-76 Honda CB360/CL360 Athena Overhaul Gasket Set

$89.95 USD
18-0189
Rebuild your CB360 engine with this Athena Overhaul Engine Gasket Set. Athena of Italy is an original-equipment supplier to Yamaha, Honda, Kawasaki, Suzuki, and...
Comparer

1974 Honda CB360G · Engine Parts Buying guide

Build the order around your CB360G twin

A top-end refresh and an external leak repair need different shopping lists. Start with the dismantled engine and its measurements, then separate complete sets from parts supplied for one piston or one adjustment point.

Parts to consider

1974-76 Honda CB360 / CL360 Standard Piston Ring Set/3 ~ Replaces Honda OEM 13011-369-305 Standard piston ringsThree rings for one standard 67 mm piston. Two sets cover both pistons; measure a previously rebuilt engine before ordering.Voir la pièce 1974-76 Honda CB360/CL360 Athena Overhaul Gasket Set Athena overhaul gasket setEngine gasket set for the 1974 CB360G. Compare the joints opened during your repair with the set before building the rest of your order.Voir la pièce Honda CB Tappet Adjuster Screw & Nut Set ~ Replaces 90012-426-000 Tappet adjuster screw and nutEach set contains one adjuster screw and one nut, replacing references 90012-426-000 and 90206-250-000.Voir la pièce

Standard bore comes first

The ring set is specified for a standard 67 mm bore and supplies three rings for one piston. Two sets cover the twin. A CB360G badge cannot establish the present bore size after decades of possible engine work; have the cylinders and pistons assessed before selecting rings.

Separate wear parts from sealing parts

An overhaul gasket set addresses engine sealing joints, while tappet screws and nuts address the valve-adjustment hardware. Each adjuster set contains one screw and one nut. Make a job-specific list before ordering so that a gasket purchase is not mistaken for a complete engine overhaul kit.

Engine Parts questions

How many ring sets do I need for both pistons?

Order two of the featured standard ring sets for both pistons. Each set contains three rings for one piston, and applies only to a suitable standard 67 mm bore.

Can I choose a gasket set before dismantling the engine?

You can identify the CB360G set first, but compare its contents with every joint your repair will disturb. Additional seals or hardware should be checked individually rather than assumed included.

Does one tappet-adjuster set cover the engine?

No. Each set contains one adjuster screw and one nut. The original CB360G has four adjusters, so replacing all four requires four sets. Replace fewer when inspection supports a smaller repair.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB360G

Votre panier

×