VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB400TI — Alimentation en carburant

A Hawk I fuel-system refresh can involve carburetor seals, hardened intake holders or the original air-filter element. Start with the condition of each area, then choose the individual repair parts rather than assuming a carburetor kit also supplies the intake and airbox pieces.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Épuisé
Honda CB throttle sleeve 53141-300-010

Honda CB Throttle Sleeve ~ Replaces 53141-300-010

$9.95 USD
02-2462
Refresh the throttle feel on your Honda with this Nylon Throttle Sleeve, a replacement for OEM Ref. #53141-300-010 with exceptionally broad fitment across the...
Honda CB1100 CB1000 CB900 CB750 float bowl gasket

Honda CB1100/CB1000/CB900/CB750 Float Bowl Gasket

$9.50 USD
20-8031
Replace your DOHC CB float bowl gasket with this Float Bowl Gasket (O-ring). Broad fitment across the 1979-82 CB750 family, CB750SC Nighthawk, CB900/CB1000/CB1100, CB650...
Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Honda CB750 CB550 CB400 filler cap 17620-399-010

Honda CB750 / CB550 / CB400 Filler Cap ~ Replaces 17620-399-010

$69.95 USD
73-0079
Replace your gas tank cap with this OEM Style Gas / Fuel Tank Cap with rubber gasket already installed, replacing OEM #17620-399-010.Note: does not...
Épuisé
Honda CB750 CB650 CB550 CB400 CB125 float needle 16011-382-004

Honda CB Float Needle ~ Replaces 16011-382-004

$8.95 USD
48-5010
Replace your float needle (only) with this Float Needle, replacing OEM #16011-382-004.Key Features• Float needle (only)• Replaces OEM #16011-382-004• Honda part name: Valve Set,...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB750 CB400 carb rebuild kit

1978-79 Honda CB750 / CB400 Carb Rebuild Kit

$21.95 USD
48-1401
Rebuild your 1979 DOHC CB750 or CB400TI/TII carb with this Carb Rebuild Kit. Contains float bowl gasket, float needle with wire clip, and O-rings.Note:...
Nouveau
Épuisé
Honda CB400 fuel petcock 16951-385-703

1978-81 Honda CB400 Fuel Petcock ~ Replaces 16951-385-703

$15.82 USD
29-0543
Keep fuel flowing reliably to your carburetors with this Fuel Petcock, designed as a direct replacement for several original Honda fuel valve assemblies. This...
Universal motorcycle carburetor synchronizer vacuum gauge 2 carb synchronizer

Universal Motorcycle Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

$54.95 USD
37-0003
Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki,...
Voir les détails
Honda CB750 CB400 carb float 16013-679-005

1978-79 Honda CB750 / CB400 Carb Float ~ Replaces 16013-679-005

$29.95 USD
20-6506
Replace your 1979 DOHC CB750 or CB400 carb float with this Carb Float with Pin, replacing OEM #16013-679-005.4 carb floats are used per bike,...
Nouveau
Honda CB450 CB400 cylinder head intake boot o-rings (set 4) 91301-371-005

1978-86 Honda CB450 / CB400 Cylinder Head Intake Boot O-Rings (Set/4) ~ Replaces 91301-371-005

$8.19 USD
48-5044
Replace your cylinder head intake boot O-rings with this Cylinder Head Intake Boot O-Rings Set of 4, size 40 x 2.6mm. Replaces OEM #91301-371-005...
Nouveau
Honda CB450 CB400 carburetor screw kit

1978/1979/1982 Honda CB450 / CB400 Carburetor Screw Kit

$15.90 USD
48-0794
Refresh your CB400 or CB450 carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look of...
Honda CB front fuel tank rubber cushion 17611-KE8-000

Front Fuel Tank Rubber Cushion ~ Replaces Honda OEM 17611-KE8-000

$5.50 USD
27-5520
This aftermarket front fuel tank rubber cushion replaces Honda OEM 17611-KE8-000 on the listed Honda CB-series applications. It mounts to the frame and supports...
Nouveau
Honda CB400 premium carb rebuild kit

1978-81 Honda CB400 Premium Carb Rebuild Kit

$34.95 USD
48-1226
Restore proper fuel delivery and carburetor performance with this Premium Carburetor Rebuild Kit, designed for Honda twin-cylinder carburetors. This kit features long-lasting, high-quality Viton...
Honda CB400 air cut off valve 16048-425-671

1978-79 Honda CB400 Air Cut Off Valve ~ Replaces 16048-425-671

$27.03 USD
20-4022
Replace your CB400's carb air cut-off valve with this Carb Air Cut-Off Valve, replacing OEM #16048-425-671 (diaphragm) plus spring and O-ring.Key Features• Carb air...
Nouveau
Honda CB450 CB400 stock type air filter 17211-413-000

1978-82 Honda CB450 / CB400 Stock Type Air Filter ~ Replaces 17211-413-000

$18.76 USD
15-0048
Replace your CB400 or CB450T stock air filter with this Stock-Type Air Filter, replacing OEM #17211-413-000.Key Features• Stock-type air filter• Replaces OEM #17211-413-000• Honda...
Nouveau
Honda CB700 CB650 CB550 fuel tank front rubber cushion 17611-KE8-000

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000

$17.95 USD
99-5145
This genuine Honda front fuel tank rubber cushion mounts to the frame and supports the front of the gas tank on select classic Honda...
Honda CB400 carb holder with rubber o-ring 16211-413-000

1978-79 Honda CB400 Carb Holder with Rubber O-Ring ~ Replaces 16211-413-000

$27.03 USD
48-1474
Replace a single CB400TI or CB400TII carb holder with rubber O-ring using this Carb Holder with Rubber O-Ring, replacing OEM #16211-413-000 (holder) and #91325-413-830...
Comparer

1978 Honda CB400TI Hawk I · Fuel-System Parts Buying guide

Plan the carburetor and intake work together

The basic carburetor kit covers one carb. The holder includes one O-ring, while the stock-type filter has its own application. Compare the fitted parts before building a coordinated service order.

Parts to consider

1978-79 Honda CB750 / CB400 Carb Rebuild Kit Single-carburetor rebuild kitFloat-bowl gasket, float needle with wire clip and O-rings. Each kit services one carburetor.Voir la pièce 1978-79 Honda CB400 Carb Holder with Rubber O-Ring ~ Replaces 16211-413-000 Carb holder with sealing O-ringOne holder and O-ring; two holders are used on the bike. Holder reference 16211-413-000.Voir la pièce 1978-82 Honda CB450 / CB400 Stock Type Air Filter ~ Replaces 17211-413-000 Stock-type air-filter elementReplacement element for the original air-filter arrangement, referencing Honda 17211-413-000.Voir la pièce

Choose sealing parts before changing calibration

The basic rebuild kit contains a float-bowl gasket, float needle with wire clip and O-rings. It is a focused service choice for those components. Decide any jetting changes separately using the fitted carburetors and engine setup, rather than treating replacement seals as a calibration decision.

Account for the intake connections

Each replacement holder includes its sealing O-ring, and two holders are used on the motorcycle. Inspect both holders and their clamps before ordering. At the airbox, compare the existing element with reference 17211-413-000 and verify that the stock housing is still fitted.

Common buying questions

Will one rebuild kit service both carburetors?

No. Each basic kit services one carburetor. Order for the number of carburetors being rebuilt, and compare their fitted components first if the original carburetor set has been replaced.

Do I need separate O-rings with new carb holders?

Each featured holder includes one O-ring. A separate O-ring pack is useful when resealing reusable holders, but it is not automatically an extra requirement when buying these holder assemblies.

Does the stock-type filter suit a pod-filter conversion?

This element is intended for the original air-filter arrangement. A pod conversion changes the mounting requirements, so choose filtration for the actual setup rather than using the frame model alone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB400TI

Votre panier

×