VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB400TI — Guidon et commandes

This Hawk I handlebar selection centers on replica rubber grips and black upper clamps. Check the bars and throttle sleeve now fitted, then choose closed or open grip ends and confirm the clamp mounting layout before planning a cockpit refresh.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1978 Honda CB400TI Hawk I · Grips & Bar Clamps Buying guide

Choose the grip ends and check the bar hardware

The two grip styles share a 130 mm length and 7/8-inch handlebar application. The open-end version includes plugs; the clamp pair is a separate mounting-hardware purchase.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack rubber replica grips for 7/8-inch handlebars, 130 mm long. Closed ends give a covered bar-end finish.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica grips with plugsBlack rubber replica grips for 7/8-inch handlebars, 130 mm long. The open-end version includes separate end plugs.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black handlebar clamp pairTwo black upper handlebar clamps for 7/8-inch bars. Fastening hardware is offered separately; compare the mounting layout before ordering.Voir la pièce

Choose the ends for your finished bar setup

Closed-end grips cover the ends of the bars. Open-end grips provide a different finish and include separate plugs. If accessories occupy the bar ends, verify their compatibility with the grip openings and available space; an open grip does not by itself establish accessory fitment.

Check the controls as part of the fit decision

Grip length must suit the bar, throttle sleeve and adjacent controls. For the clamps, compare the mating surfaces and bolt layout with the fitted upper assembly. Follow the appropriate service instructions when fitting the parts and verify unobstructed throttle movement before riding.

Buying questions

Are the grips genuine Honda products?

They are OEM-type replicas, not described as genuine Honda grips. Both black rubber styles are listed for 7/8-inch handlebars and measure 130 mm long; choose the end style that suits your fitted bar arrangement.

Does the open-end grip version include bar-end plugs?

Yes. Separate end plugs are included with the open-end version. If you plan to use bar-end accessories instead, check the accessory mounting requirements and grip clearance rather than assuming the supplied plugs establish compatibility.

Does the clamp pair come with its bolts?

Fastening hardware is offered separately from the clamp pair. Inspect the existing bolts and compare the mounting layout before ordering so you can identify any additional hardware the job requires.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB400TI

Votre panier

×