VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB400TI — Plaquettes, mâchoires, durites et tiges de frein

Rear drum service can involve the friction shoes, the rod linkage or both. The Hawk I choices here separate a two-shoe set from the rod-to-arm joint and adjusting nut, helping you replace the worn pieces without confusing them with front-brake parts.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Plaquettes, mâchoires, durites et tiges de frein

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Honda CB750 CB700 CB650 CB550 CB500 brake rod joint pin w cotter pin

Honda CB Brake Rod Joint Pin with Cotter Pin

$5.95 USD
73-0844
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Honda CB550 CB450 CB400 rear friction shoe set 43120-413-006

Honda CB550 / CB450 / CB400 Rear Friction Shoe Set ~ Replaces 43120-413-006

$34.95 USD
29-3102
Replace your CB400 or CB450 rear brake shoes with this Rear Brake Shoe Set of 2, replacing OEM #43120-413-006. Diameter 139mm, width 40mm.Key Features•...
Comparer

1978 Honda CB400TI Hawk I · Rear Brake Shoes & Rod Parts Buying guide

Distinguish rear friction parts from rod hardware

The rear shoes are specified as 139 mm in diameter and 40 mm wide. The joint and adjusting nut are separate linkage components, each with its own Honda reference.

Parts to consider

Honda CB550 / CB450 / CB400 Rear Friction Shoe Set ~ Replaces 43120-413-006 Rear drum-brake shoe setTwo rear brake shoes, 139 mm diameter and 40 mm wide, replacing Honda reference 43120-413-006.Voir la pièce Honda CB750/CB700/CB650/CB550 Brake Rod Joint Brake rod-to-arm jointReplacement joint for the brake rod and arm, referencing Honda 95015-32001.Voir la pièce Honda CB Brake Rod Adjusting Nut Brake-rod adjusting nutReplacement brake-rod adjustment nut, referencing Honda 95015-42000.Voir la pièce

Choose shoes for the rear drum

This shoe set is explicitly for the rear brake and contains two shoes. Match the 139 mm diameter and 40 mm width to the application being serviced. Inspect the drum and related hardware using the service manual before deciding the complete brake-service order.

Build the linkage order from inspection

The joint references 95015-32001 and the adjusting nut references 95015-42000. Identify which piece is worn or missing before ordering. These are separate parts rather than a complete brake rod assembly, and new adjustment hardware is not a substitute for assessing friction wear.

Common buying questions

Does the rear shoe set contain both shoes?

Yes. The package is a set of two rear brake shoes, referencing 43120-413-006. Its stated dimensions are 139 mm diameter and 40 mm width; verify a changed rear wheel separately.

Should I buy a joint or an adjusting nut?

They serve different positions in the linkage. The joint is the rod-to-arm connection, while the nut provides adjustment on the rod. Compare the worn component and its reference before choosing.

When should I order linkage parts along with the shoes?

Inspect the rod joint and adjustment threads during the brake service. Add the worn or damaged linkage pieces you find, and assess the drum and shoes separately against the service limits.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB400TI

Votre panier

×