VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB500T Twin — Pièces de bras oscillant

Grease fittings are nipple A .45 in a pack of two, and they name the 1975-76 CB500T. The shock bushing is sold individually at 19mm long, 22mm outside, and 10mm inside. Dust caps are a pair for the ends of the swingarm pivot.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Épuisé
Honda CB750 CB650 performance kibblewhite bronze swingarm bushing set 52108-457-300

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300

$69.95 USD
28-1038
Upgrade your swingarm bushings with this Kibblewhite High Performance Bronze Swingarm Bushing Set of 2, replacing OEM #52108-457-300 / #52108-422-300. Made in the USA...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Comparer

1975 Honda CB500T · Swing Arm Parts Buying guide

Nipple, shock bushing, or dust cap

Grease the pivot with the nipple pack. Space the shock with the 19mm bushing and order one for each mount you replace. Cap the pivot ends with the dust-seal pair, which names the 1975-76 CB500T.

Parts to consider

Honda CB Swingarm Grease Fitting Nipple (Pk/2) Swingarm grease nipple A .45Grease fitting nipple A .45, a pack of two, for the swingarm, replacing 96201-30001. The fitment names the 1975-76 CB500T. These nipples are not the dust caps on the pivot ends.Voir la pièce Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000 Shock bushing, 19 x 22 x 10mmBushing between the shock and the swingarm, 19mm long, 22mm outside diameter, 10mm inside diameter, replacing 40548-268-000. Sold individually, so order the quantity you need. No model year is printed with those dimensions.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000 Pivot dust caps, set of twoDust seal caps for the ends of the swingarm pivot, a set of two, replacing 52144-362-000. The fitment names the 1975-76 CB500T. They cover the pivot. They do not replace the grease nipples.Voir la pièce

19mm bushing versus a bronze set

The bushing is 19mm long, 22mm outside, and 10mm inside, sold one at a time, replacing 40548-268-000. No model year is printed with it. A Kibblewhite bronze set names 52108-457-300, and another bronze set sits beside that name. Neither gives a length, so neither is this 19mm bushing.

Nipple feeds grease, cap covers the pivot

Nipple A .45 replaces 96201-30001 as a pack of two and names the 1975-76 CB500T. Dust caps replace 52144-362-000 as a set of two on the pivot ends, and they name that twin too. One lets you grease the swingarm. The other shields the pivot end.

Bushing, nipple, or dust cap?

How many shock bushings should I order?

The bushing is sold individually, and the description says to order the quantity required. It does not state a per-bike count. Match each one to 19mm length, 22mm outside, and 10mm inside under 40548-268-000.

Do the dust caps replace the grease fittings?

No. Dust caps are a set of two for the pivot ends, replacing 52144-362-000, and they name the 1975-76 CB500T. Grease fittings are nipple A .45, a pack of two, replacing 96201-30001, and they name that twin too. Each piece has its own place.

Is the 19mm bushing a bronze swingarm set?

No. The 19mm piece replaces 40548-268-000 and sits between the shock and the swingarm. The bronze sets are named separately, and the Kibblewhite set cites 52108-457-300. Those names do not give a length, so match the bushing by the three dimensions.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB500T Twin

Votre panier

×