Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1975 Honda CB500T · Tach & Speedo Buying guide
Vintage KPH and a mini MPH speedometer do not share a ratio. The tach for the CB500 family is stated as 7:1, not 4:1. The black cable is 38.5 in. end to end and it does name the 1975-76 CB500T.
Vintage KPH speedometer, 85mmMechanical vintage speedometer, 0-220 KPH, 85mm diameter, LED, and 60 km/h = 1400 rpm. Mounting points are 57mm center to center, and custom mounting is required. Confirm ratio, cable or electrical connection, diameter, and mounts. An MPH version of this speedo is also made.Voir la pièce
All-black mini tach, 7:12.25 in. mechanical tach with an all-black body and black face, 0-12000 rpm, and LED. Drive ratio is 7:1 for CB500, CB550, CB350F, CB400F, and CB400T, not the 4:1 used on CB750s. A V plate is included. The bracket is separate. Confirm 7:1 before you order.Voir la pièce
Pièces connexes : Mini speedometer, white face, 0-140 MPH · Meter cushion, two per bike · MPH faces for the original gauges
The vintage KPH unit prints 60 km/h = 1400 rpm and runs to 220 KPH at 85mm. The white-face mini is 2.25 in., 0-140 MPH, and 60 MPH = 2240 rpm. It says the ratio matches stock-type CB cables, and the gauge is not a stock-type replacement. Do not mix 1400 rpm with 2240 rpm.
A 7:1 tach does not fix a wrong speedometer ratio. This tach says 4:1 is the CB750 drive, not the drive for CB500, CB550, CB350F, CB400F, and CB400T. The cable is the 38.5 in. piece that names the 1975-76 CB500T. MPH face decals go on the original gauges and state no drive ratio.
The vintage KPH speedometer needs custom mounting, an 85mm diameter, and mounting points 57mm center to center. The mini tach includes a V plate and still needs a separate bracket. Do not assume one bracket fits both diameters.
No. The face set is MPH artwork for the original speedometer and tach. It must sit on the original face to illuminate, and both gauges come apart. It does not replace the 38.5 in. cable or set a 7:1 or 2240 drive.
38.5 inches end to end, black, made in Japan, replacing 44830-425-870, for the 1975-76 CB500T. Measure the cable on the bike if a previous one was cut or extended. This is the only length given for this cable.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.