VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB500T Twin — Amortisseurs

Pick the shock by how it is measured, not by the word stock alone. Black and chrome 335mm sets are eye-to-clevis and described as factory ride height. The chrome 321mm set is center-of-eye to clevis. The shrouded set is 290mm and shorter than stock.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB black 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB black and chrome 335mm stock length shock absorber set

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Nouveau
Honda CB500T CB550 CB400F CB360 shock absorber set 321mm 52400-375-000

Honda CB Stock Type Shock Absorber Set ~ Chrome 321mm

$139.95 USD
06-3648
Get a stock-style design without the upper shroud using this Stock-Type Shock Absorber Set, all-chrome finish. Modelled after original OEM shocks and replacing OEM...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1975 Honda CB500T · Shock Absorbers Buying guide

Separate 335mm, 321mm, and 290mm

Black 335mm keeps the stated stock eye-to-clevis and adds a black end cap. Chrome 335mm is that same length without the end cap. Choose 321mm or 290mm only after you compare how each one is measured.

Parts to consider

Honda CB Stock Length Shock Absorber Set ~ Black 335mm All-black 335mm stock-length shocksBlack body, black progressive-wound springs, and a black end cap at 335mm (13 3/16 in.) eye-to-clevis to hold factory ride height. Preload has 4 positions. Bushings, inserts, washers, and a preload wrench are in the set.Voir la pièce Honda CB Stock Type Shock Absorber Set ~ Chrome 321mm Chrome 321mm shocks, no shroudAll-chrome stock-type shocks with no upper shroud, 321mm (12.6 in.) center-of-eye to clevis, and a rubber damper already in the top eye. Preload is 5-position, up from the original 3. The 20mm top eye may need washers. They replace 52400-375-000, 52400-375-611, and 52400-404-013.Voir la pièce Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm Shrouded black shocks, 290mmBlack body, black shroud, and black progressive-wound springs at 290mm (11 3/8 in.) eye-to-clevis, which is shorter than stock, for a custom stance. The upper bushing is 12mm inside by 21mm. Preload has 5 positions.Voir la pièce

Pièces connexes : Shock mount nut, two per bike · Shock joint rubbers, set of two · Chrome 335mm shocks, no end cap

Black 335mm versus chrome 335mm

Both stock-length sets measure 335mm (13 3/16 in.) eye-to-clevis, use 4-position preload, and include bushings, inserts, washers, and a preload wrench. The black set adds a black end cap. The chrome set is chrome springs and body without that end cap. The ride-height claim stays 335mm.

321mm, 290mm, and the mount nut

The 321 mm set has no upper shroud, 5-position preload, and a 20 mm top eye that may need washers. The 290 mm set is shrouded, uses a 12 by 21 mm upper bushing, and is shorter. Nut 90309-315-000 is noted as two per bike. Match the nut to the stud on the shock you have.

Which shock length should I order?

Which number is factory ride height?

The 335mm eye-to-clevis sets are described as stock length and factory ride height, black with an end cap or chrome without one. The 290mm set is shorter than stock. The 321mm figure is center-of-eye to clevis, a different measurement.

Why might the 321mm shocks need washers?

The top eye is 20mm wide, and the description says some models need washers at the shock mount. A rubber damper is already in that upper eye. Check the 20mm width against the mount on your bike before you leave the washers out.

Are the joint rubbers the shock bushing?

No. Joint rubbers are a pair replacing 52484-292-000. The shock bushing is sold individually and measures 19mm long, 22mm outside, and 10mm inside, replacing 40548-268-000. Use the rubbers at the joint and the bushing between shock and swingarm.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB500T Twin

Votre panier

×