VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB500T Twin — Alimentation en carburant

A 1975 CB500T has two carburetors, and the rebuild kit covers one of them. Jets, the float, the needle, and both tank-cap styles are separate parts. Measure the carb inlet before you order a 49 mm pod for either side.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB front fuel tank holder rubber 17611-283-010

Honda CB Front Fuel Tank Holder Rubber ~ Replaces 17611-283-010

$7.87 USD
02-6534
Secure the front of your fuel tank with this Front Fuel Tank Holder Rubber, a direct replacement for OEM #17611-283-010. Fits a broad range...
Solde
Honda CB750 CB550 CB500 CB400 CB360 gas cap rubber seal 17534-323-300

Honda CB Gas Cap Rubber Seal ~ Replaces 17534-323-300

$8.19 $7.95 USD
You save $0.24
20-0039
Replace your mid-'70s Honda gas cap rubber seal with this Gas Cap Rubber Seal, replacing OEM #17534-323-300. Broad fitment across the SOHC CB750K, CB500/CB550...
Honda CB750 CB550 CB500 CB450 type filler chrome cap 17510-323-310

Honda CB OEM Type Filler Chrome Cap ~ Replaces 17510-323-310

$49.95 USD
20-0045
Replace your OEM-type filler cap with this OEM Type Gas/Fuel Tank Chrome Cap, including gasket and hinge pin with E-clip for easy installation. Replaces...
Honda CB750 CB500 CB450 CB125 CB100 float valve 16011-302-004

Honda CB Float Valve ~ Replaces 16011-302-004

$9.95 USD
48-5009
Replace your float needle and seat with this Float Valve Set (needle and seat), replacing OEM #16011-302-004 / #16011-375-004.Key Features• Float valve set (needle...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Nouveau
Épuisé
Honda CB1000 CB900 CB750 fuel tank emblem clamp nut 87311-634-600

Honda CB Fuel Tank Emblem Clamp Nut ~ Replaces 87311-634-600

$6.25 USD
99-5267
Secure your fuel tank emblem properly with this Fuel Tank Emblem Clamp Nut, designed as a direct replacement for the original Honda hardware. This...
Nouveau
Honda CB550F CB550K CB500K CB500T carburetor screw kit

1971-77 Honda CB550 / CB500 Carburetor Screw Kit

$17.50 USD
49-0773
Refresh your CB500 or CB550 carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look of...
Honda CB750 CB550 CB450 CB400F fuel tank cap latch 17510-323-310

Honda CB Matte Black Fuel Tank Cap with Latch ~ Replaces 17510-323-310

$69.95 USD
07-9967
Restore your classic Honda's tank with a factory-look matte-black finish using this Matte Black OEM-Type Fuel Tank Cap with Latch Assembly. A direct replacement...
Honda CB750 CB550 CB400F CB450 CB360 tank cap latch assembly black

Honda CB Gas/Fuel Tank Cap Latch Assembly ~ Black

$29.95 USD
01-9934
Replace a broken, missing, or worn-out fuel cap latch with this Gas/Fuel Tank Cap Latch Assembly in black. Includes the black latch, return spring,...
Universal motorcycle carburetor synchronizer vacuum gauge 2 carb synchronizer

Universal Motorcycle Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

$54.95 USD
37-0003
Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki,...
Voir les détails
Honda CB500 CB450 CL450K0 CL450K2 CL450K3 carb float 16013-283-004

Honda CB Carb Float ~ Replaces 16013-283-004

$17.95 USD
20-6512
Replace your CB500T or CB450/CL450 carb float with this Carb Float with Pin, replacing OEM #16013-283-004.Sold each, order the quantity your bike requires.Key Features•...
Universal motorcycle 49mm chrome cap pod air filter

Universal Motorcycle 49mm Chrome Cap POD Air Filter

$24.95 USD
15-0034
49mm Chrome Cap POD Air Filter for custom or restoration work on classic Honda CB motorcycles. Measure the outside diameter of the carburetor inlet...
Voir les détails
Nouveau
Honda CB500T carb rebuild kit

1975-76 Honda CB500T Carb Rebuild Kit

$21.95 USD
48-1399
Rebuild your CB500T carb with this Carb Rebuild Kit.Note: each kit rebuilds one carb, order the quantity you require.Key Features• Carb rebuild kit• Rebuilds...
Honda CB500T CB450 CB360 CB350 slow pilot jet #35 99124-286-0351

Honda CB500T / CB450 / CB360 / CB350 Slow / Pilot Jet #35 ~ Replaces 99124-286-0351

$7.00 USD
48-1587
Restore clean idle and low-speed fuel metering with this aftermarket Keihin-style slow / pilot jet, size #35. It replaces Honda OEM #99124-286-0351 for the...
Comparer

1975 Honda CB500T · Fuel System Buying guide

Kit, jet, and cap are separate choices

Use a kit on each carburetor you open. Read the slow jet in the carb before you buy size #35. Pick the chrome cap or the matte latch cap by which pieces your tank cap is missing.

Parts to consider

1975-76 Honda CB500T Carb Rebuild Kit CB500T Carb Rebuild KitSpecified for the 1975-76 CB500T as one carburetor. Order a second kit for the other side. Add the slow jet, float, or needle only when that piece is the one you are replacing.Voir la pièce Honda CB OEM Type Filler Chrome Cap ~ Replaces 17510-323-310 Chrome Fuel Tank CapReplaces Honda 17510-323-310 and includes the gasket plus a hinge pin with E-clip. The matte-black cap uses the same Honda number and also includes the latch. Use chrome when your latch still works.Voir la pièce Universal Motorcycle 49mm Chrome Cap POD Air Filter 49 mm Chrome Cap PodAftermarket filter sold one at a time. It fits the 1975 and 1976 CB500T only when the carb inlet measures 49 mm outside. Order one for each carb you convert, and expect possible jetting changes.Voir la pièce

Pièces connexes : Slow jet #35 · Carb float with pin · Front tank cushion

Read the jet that is in the carb

The slow jet replaces Honda 99124-286-0351. It is a Keihin-style pilot, size #35, for idle and just off idle. Buy it only when your carburetor uses that jet style and you want #35, not a larger or smaller pilot. One jet services one carburetor, so this twin needs two if both pilots are being replaced. It is not a main jet.

Pick the cap by the broken piece

Both caps replace 17510-323-310. The chrome cap includes the gasket and the hinge pin with an E-clip. The matte-black cap adds the latch, return spring, mounting pin, and C-clip. A separate seal, 17534-323-300, is only the cap rubber. Keep the old cap and buy that seal when the rubber is the worn part.

Carb and tank cap questions

How many rebuild kits does this twin need?

One kit services one carburetor on the 1975-76 CB500T. Servicing both carburetors takes two kits. If you are only refreshing one side, order one kit and leave the other carburetor alone.

Is the float the same part as the needle?

No. The float replaces 16013-283-004 and includes the pin. The float valve is the needle and seat, replacing 16011-302-004 and 16011-375-004. Replace the piece that is worn. The rebuild kit does not print either of those numbers.

What should I measure before ordering the pod?

Measure the outside diameter of the carburetor inlet. The pod is for 49 mm. This twin has two inlets, and each filter is sold one at a time. The maker says a pod may need jetting changes, so it is not a stock airbox element.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB500T Twin

Votre panier

×