Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1975 Honda CB500T · Frame & Body Buying guide
The pivot bolt and nut hold the stand on. The spring returns it. The cushion stops frame clank. The stopper is a separate bumper. Footrest rubbers are a set of two.
Side Stand Pivot Bolt and NutBolt 90108-283-000 and nut 94002-10000-0S. This set fastens the side stand to the frame on the 1975-76 CB500T. It is not the return spring and not the rubber bumper.Voir la pièce
Footrest Rubbers, Set of TwoA pair replacing 50661-369-000 for the 1975-76 CB500T. One order is both rubbers. Use it when the peg rubbers are hard, torn, or missing, not for the shift or kick rubbers.Voir la pièce
Seat Lock with KeysReplaces 77230-399-007 and 77230-107-711, and keys are included. The lock body sits a little farther out than the original. If the old key is lost, remove the bracket with a short 10 mm wrench or socket.Voir la pièce
Pièces connexes : Kickstarter rubber · Side stand cushion · Sidestand stopper
Three rubbers get mixed up. The kickstarter rubber, 28311-329-000, slips onto the kick lever. The side-stand cushion, 50548-356-700, stops the stand from clanking on the frame. The stopper, 95011-61000, is stopper rubber A, a different bumper. The shift-lever rubber is yet another part, 95011-40000. Match the number you removed.
The lock, 77230-399-007, is the cylinder, and this one sits slightly farther out than the original. The bar, 77220-340-003 or 77220-340-011, is what the lock moves. A key that works but a seat that will not catch points to the bar. A lost key or a worn cylinder means the lock.
That is the side-stand cushion, Honda 50548-356-700. It is the piece that keeps the stand from hitting the frame. The stopper, 95011-61000, is a different bumper. The pivot bolt is the hinge, not the cushion.
The pivot set is bolt 90108-283-000 and nut 94002-10000-0S. It is the hinge. The return spring is 95014-72402. A wallowed pivot hole needs the bolt and nut. A stretched or broken spring needs the spring. One does not replace the other.
The lock bracket and assembly have to come off before the new lock goes in. A short 10 mm wrench or socket reaches that hardware. The replacement lock includes keys, and the body sits slightly farther out than the original.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.