VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB500T Twin — Flotteurs et composants de carburateur

The float replaces 16013-283-004 and includes the pin, sold one at a time. The drain screw includes an O-ring, one per bowl. The screw kit only refreshes how the carburetor hardware looks.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Nouveau
Honda CB550F CB550K CB500K CB500T carburetor screw kit

1971-77 Honda CB550 / CB500 Carburetor Screw Kit

$17.50 USD
49-0773
Refresh your CB500 or CB550 carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look of...
Honda CB500 CB450 CL450K0 CL450K2 CL450K3 carb float 16013-283-004

Honda CB Carb Float ~ Replaces 16013-283-004

$17.95 USD
20-6512
Replace your CB500T or CB450/CL450 carb float with this Carb Float with Pin, replacing OEM #16013-283-004.Sold each, order the quantity your bike requires.Key Features•...
Comparer

1975 Honda CB500T · Carb Floats & Other Carb Components Buying guide

Float, drain plug, or top screws

A sunk float, a weeping bowl plug, and dull carb screws are three different orders. Match the Honda number on the float, and buy one drain screw for each bowl you are servicing.

Parts to consider

Honda CB Carb Float ~ Replaces 16013-283-004 Carb Float with PinReplaces 16013-283-004 for the 1975-76 CB500T and includes the pin. Sold one at a time, so order one float for each carburetor that needs it. The needle and seat are a different part.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Float Bowl Drain ScrewStock-type bowl plug sold one at a time, with an O-ring. It fits the 1975-76 CB500T among other Hondas. A twin has two bowls, so two screws if you are resealing both.Voir la pièce 1971-77 Honda CB550 / CB500 Carburetor Screw Kit Carburetor Screw KitA set of screws to clean up the look of CB500 and CB550 carburetors, including the 1975-76 CB500T. It is appearance hardware. It does not include jets, a float, or a needle.Voir la pièce

Keep the float and the needle apart

Fuel climbing up the overflow is not automatically a bad float. A punctured float or a missing pin is 16013-283-004, and the pin comes with that float. A grooved needle tip is the valve set 16011-302-004, which is not this part. Replace the one you can see is worn instead of buying both on a guess.

The drain screw is a small leak of its own

A wet seam at the bottom of the bowl is often the drain plug, not the float. This screw includes a new O-ring and is sold one at a time. Open one bowl at a time if you are chasing a single drip, and replace both screws only when both plugs are seeping or the O-rings are hard.

Float and bowl questions

Does the float include the pin?

Yes. The float for 16013-283-004 is sold with the pin. You do not need a separate pin for that float. You still need the needle and seat if that valve is worn, because those pieces are not on this float.

How many drain screws does one bowl take?

One screw per bowl. The part is sold one at a time and includes the O-ring. Order two only when you are resealing both carburetors on the twin.

Will the screw kit change how the carbs run?

No. It is a hardware set for the look of the carburetors on the 1975-76 CB500T and related CB500 and CB550 models. Jetting, the float, and the needle stay on their own parts.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB500T Twin

Votre panier

×