1975 CB500T Carb Kit and Slow Jet

Préciser la sous-catégorie

Consultation en cours Réfection de carburateurs et gicleurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

Honda CB750 CB500 CB450 CB125 CB100 float valve 16011-302-004

Honda CB Float Valve ~ Replaces 16011-302-004

$9.95 USD

Replace your float needle and seat with this Float Valve Set (needle and seat), replacing OEM #16011-302-004 / #16011-375-004.Key Features• Float valve set (needle...

Nouveau

1975-76 Honda CB500T Carb Rebuild Kit

$21.95 USD

Rebuild your CB500T carb with this Carb Rebuild Kit.Note: each kit rebuilds one carb, order the quantity you require.Key Features• Carb rebuild kit• Rebuilds...

Honda CB500T CB450 CB360 CB350 slow pilot jet #35 99124-286-0351

Honda CB500T / CB450 / CB360 / CB350 Slow / Pilot Jet #35 ~ Replaces 99124-286-0351

$7.00 USD

Restore clean idle and low-speed fuel metering with this aftermarket Keihin-style slow / pilot jet, size #35. It replaces Honda OEM #99124-286-0351 for the...

Comparer

1975 Honda CB500T · Carb Rebuild & Jetting Buying guide

Match the part to the fault

The kit names only the 1975-76 CB500T and rebuilds one carburetor. The slow jet is size #35. The valve set is a needle and seat under two Honda numbers. Order the piece that matches the failure.

Parts to consider

CB500T Carb Rebuild KitRebuilds one carburetor and names the 1975-76 CB500T only. It does not print a jet size or a needle number. Order one kit per carburetor, and add a jet or valve only if you are replacing that piece.Voir la pièce

Honda CB500T / CB450 / CB360 / CB350 Slow / Pilot Jet #35 ~ Replaces 99124-286-0351

Slow Jet #35Keihin-style pilot for idle and low speed. Size #35, replacing 99124-286-0351, sold one at a time. Confirm your carburetor uses the 99124-286 jet style and that #35 is the size you removed or want.Voir la pièce

Honda CB Float Valve ~ Replaces 16011-302-004

Float Needle and SeatNeedle and seat set replacing 16011-302-004 and 16011-375-004. It also fits several other Hondas, so match the number on the old valve. This is not the brass float.Voir la pièce

Replace the pilot, not a guess

Pull the slow jet and read the size stamped on it. Size #35 replaces 99124-286-0351 and meters idle, not wide-open throttle. If the removed jet is a different size, do not step to #35 just because it is the jet offered here. Two carburetors need two jets when both pilots are being replaced.

Needle wear is separate from the float

A needle that no longer shuts off fuel is the valve set, 16011-302-004 or 16011-375-004, which includes the seat. A float that sinks or a lost pin is 16013-283-004, and that float is not in this valve. The rebuild kit prints neither number, so add the valve only when the needle or seat is the bad part.

Jet and needle questions

Can I use this #35 jet as a main jet?

No. It is a slow, or pilot, jet for idle and just off idle. A main jet is a different part and a different size series. Buy #35 only after you confirm the 99124-286 style and that #35 is the pilot you want.

How many jets should I order for both carbs?

The jet is sold one at a time, and each carburetor uses its own pilot. Replacing both slow jets on this twin means two pieces. Order one if you are only correcting a single carburetor.

Does the valve set include the float?

It includes the needle and the seat, not the brass float or the float pin. The float is Honda 16013-283-004. Use the valve when the needle tip or seat is worn. Use the float when the float itself is punctured or the pin is gone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 1975 Honda CB500T Twin

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces

Magasiner par catégorie