VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB500T Twin — Disques et ressorts d’embrayage

Friction plates and steel drive plates are different parts, and each one is a single plate. The 1975-76 CB500T friction count is seven. No steel count is given for this model. The third piece is a 16mm tab washer, not a clutch spring.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Disques et ressorts d’embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB500 clutch tab washer 90431-292-000

Honda CB Clutch Tab Washer ~ Replaces 90431-292-000

$7.50 USD
73-0839
Replace your clutch tab washer with this Clutch Washer, 16mm size, replacing OEM #90431-292-000.Key Features• Clutch tab washer• 16mm size• Replaces OEM #90431-292-000• Honda...
Honda CB750 CB700 CB500 CB450 CL450K0 steel clutch plate 22321-MG8-000

Honda CB Steel Clutch Plate ~ Replaces 22321-MG8-000

$11.95 USD
39-1409
Replace your SOHC CB750, CB700SC Nighthawk, CB500T, or CB450/CL450 steel clutch plate with this Steel Clutch Drive Plate, replacing OEM #22321-MG8-000 / #22321-283-000.Order the...
Honda CB1000 CB500 CB450 CL450K0 clutch friction plate 22201-MA7-000

Honda CB Clutch Friction Plate ~ Replaces 22201-MA7-000

$8.95 USD
39-1046
Replace your clutch friction plates with this Clutch Friction Plate, replacing OEM #22201-MA7-000 / #22201-283-000.Order the number of pieces required for your model.Key Features•...
Comparer

1975 Honda CB500T · Clutch Plates & Springs Buying guide

Count friction plates, then count the steels

The friction plate replaces OEM 22201-MA7-000 and 22201-283-000. The steel drive plate replaces OEM 22321-MG8-000 and 22321-283-000. The tab washer is 16mm under OEM 90431-292-000. Count plates and the washer as three different pieces.

Parts to consider

Honda CB Clutch Friction Plate ~ Replaces 22201-MA7-000 Clutch friction plateOne clutch friction plate, replacing OEM 22201-MA7-000 and 22201-283-000. Order the number of pieces required. A 1975-76 CB500T uses seven per bike. The one-piece note for a 1994-95 CB1000 is that model only.Voir la pièce Honda CB Steel Clutch Plate ~ Replaces 22321-MG8-000 Steel clutch drive plateOne steel clutch drive plate, replacing 22321-MG8-000 and 22321-283-000. Order the number you remove. Six and five are counts given for CB750 years, not for this CB500T. This model is named without a steel count.Voir la pièce Honda CB Clutch Tab Washer ~ Replaces 90431-292-000 Clutch tab washer, 16mmA clutch tab washer, 16mm, replacing OEM 90431-292-000. The 1975-76 CB500T is named among many other Hondas. It is not a friction plate and not a steel drive plate, so it does not change either plate count.Voir la pièce

CB750 steel counts stay with those models

The five- and six-plate steel figures belong to the CB750, police, and CB700SC years written beside them. The CB500T is named on the same steel plate, but no steel quantity is given for it. Count the old steels and order that many single plates.

Keep the washer out of the plate tally

The tab washer is 16mm under OEM 90431-292-000, and the 1975-76 CB500T is named on it. It is not an extra friction plate and not an extra steel. Renew it when the tab is damaged, and leave it out of the plate count. Seven is only the friction-plate figure.

Friction plate, steel plate, or the 16mm washer?

How do I tell a friction plate from a steel drive plate?

The friction plate replaces OEM 22201-MA7-000 and 22201-283-000. The steel drive plate replaces OEM 22321-MG8-000 and 22321-283-000. Both are ordered one plate at a time. The 16mm tab washer under OEM 90431-292-000 is neither plate.

A CB750 uses five or six steels. Should this model follow that?

No. Those counts are written for the CB750 and CB700SC years in that text. The 1975-76 CB500T is named on the same steel plate without a quantity. Count the steel drive plates you removed and order that many single plates.

Does the 16mm washer change how many plates I need?

No. It replaces OEM 90431-292-000, it is 16mm, and the 1975-76 CB500T is named. It is a tab washer, not a friction plate or a steel plate. Replace it when the tab is damaged, and keep your plate count separate from it.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB500T Twin

Votre panier

×