Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1974 Honda CB350F1 · Suspension & Wheels Buying guide
Use dimensions for the part being replaced and factory references where available. A later wheel or swingarm fitted to an earlier frame requires identification by the actual assembly.
The fork tube pair references 51410-317-700, matching Honda’s F1 tube reference. The seller specifies 555 mm length and 33 mm outside diameter; measure the existing tubes before ordering. Front spokes are a separate kit of 36 spokes and 36 nipples for the stock 18-inch wheel.
Honda changes the rear rim and spoke dimensions from frame CB350F-2002383. A different change to the swingarm bushes and dust caps follows at CB350F-2002817. Record the full frame number, then check whether either assembly has been replaced during the bike’s life.
No. Honda lists different rear rims and spoke lengths across the F1 change at frame CB350F-2002383. Identify the fitted rim and hub rather than selecting rear spokes from diameter alone.
Compare the existing tube length and outside diameter with the offered pair’s 555 mm length and 33 mm diameter. Confirm the fitted front end and intended setup, particularly if the forks have previously been changed.
It identifies the original production arrangement, but wheels, forks and swingarms may have been replaced. Use the serial information together with inspection of the fitted assemblies before buying version-dependent parts.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.