VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB360T — Clignotants, supports, cabochons et réflecteurs

Signal repairs on the 1976 CB360T can involve the supporting stay, the lens seal or a screw-on reflector. Measure the existing mount before choosing a stay, and match replacement gaskets to the fitted lamp housing, especially after a previous lighting conversion.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Honda CB750 CB550 CB500 CB360 rear turn signal stay 33441-369-000

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...
Comparer

1976 Honda CB360T · Signal Mounts & Gaskets Buying guide

Match the signal stay before ordering the lamp seal

The front and rear stay choices differ in shape and dimensions. Gaskets serve the original-style lamp housing; they should be chosen from the fitted lens and seal recess.

Parts to consider

Honda CB Front Turn Signal Stay Chrome front signal stay65mm body plus 25mm thread, giving a 90mm overall length.Voir la pièce Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000 125mm chrome rear stayLong rear signal-stay option; compare its length and mounting shape with your installation.Voir la pièce Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671 Turn-signal lens gasketReplacement for 33443-268-671 for the original-style lamp seal.Voir la pièce

Pièces connexes : 6mm screw-on reflector

Measure the right part of the stay

The front stay’s 90mm overall measurement includes its 25mm threaded section. The rear stay is described as 125mm long. Compare each replacement with the corresponding front or rear mount; avoid treating different measurement descriptions as evidence that the stays are interchangeable.

Keep the seal matched to its housing

The replacement signal gasket follows reference 33443-268-671. Check the recess and lens shape if the lamps have been changed. For a missing reflector, the linked screw-on replacement uses a 6mm thread, so inspect the receiving mount before adding it to the order.

Signal Mounts & Gaskets questions

Can I use the front and rear stays interchangeably?

Choose by position, mounting shape and measured length. The front stay has a 65mm body and 25mm threaded section; the rear option is 125mm long. Their descriptions are not an interchange instruction.

Will the gasket fit smaller custom indicators?

Do not assume so. It replaces the original-style 33443-268-671 lens gasket. Compare the custom lamp’s lens and sealing recess, or use the seal specified by that lamp’s manufacturer.

What mounting thread does the related reflector use?

The screw-on reflector uses a 6mm thread. Check the mount and available clearance on the motorcycle before ordering, particularly where an aftermarket bracket has replaced the original reflector support.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB360T

Votre panier

×