VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB360T — Démarrage et système de charge

A cranking problem and a charging fault need different parts on the 1976 CB360T. Inspect the heavy starter lead and its terminal protection separately from the rectifier connection. Where the charging system has been modified, identify the installed components and battery type first.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Démarrage et système de charge

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 starter motor terminal rubber boot 32411-230-000

Honda CB Starter Motor Terminal Rubber Boot ~ Replaces 32411-230-000

$4.61 USD
73-0092
Replace your starter motor terminal cover with this Starter Motor Terminal (Cover) Rubber Boot, replacing OEM #32411-230-000.Key Features• Starter motor terminal rubber boot• Replaces...
Honda CB1100 CB1000 CB900 CB750 starter clutch diode 31700-124-003

Honda CB Starter Clutch Diode ~ Replaces 31700-124-003

$12.88 USD
24-2044
Replace your starter clutch diode with this Stator Clutch Diode/Rectifier, replacing OEM #31700-124-003 / #31700-166-008. Exceptionally broad fitment across the SOHC and DOHC CB750...
Honda CB750 CB550 CB500 CB450 starter solenoid relay 35850-375-000

Honda CB Starter Solenoid Relay ~ Replaces 35850-375-000

$38.95 USD
24-2003
Replace your late-'70s CB starter solenoid with this Starter Solenoid Relay, replacing OEM #35850-375-000 / #35850-286-027. Broad fitment across the late SOHC CB750, CB500T/CB550...
Nouveau
Honda CB starter motor seal 60 x 1.4 31206-286-158

Honda CB Starter Motor Seal 60 x 1.4 ~ Replaces 31206-286-158

$5.95 USD
03-0784
Seal up your starter motor with this Starter Motor Seal, size 60 x 1.4, replacing OEM #31206-286-158 / #31206-402-008. Exceptionally broad fitment across the...
Nouveau
Honda CB500 CB450 CB360 CB350 CL350K0 rectifier 31700-455-671

Honda CB Rectifier ~ Replaces 31700-455-671

$22.95 USD
24-2078
Replace your CB350, CB360, CB450, or CB500T rectifier with this Rectifier with female connector, replacing OEM #31700-455-671 / #31700-358-305 / #31700-358-013 / #31700-292-008 /...
Honda CB360 CB350 starter motor cable 32410-286-000

1968-76 Honda CB360 / CB350 Starter Motor Cable ~ Replaces Honda OEM 32410-286-000

$51.95 USD
24-6028
Replace a worn, damaged, or corroded starter motor cable with this aftermarket cable made to replace Honda OEM 32410-286-000. This heavy starter lead carries...
Nouveau
Universal motorcycle rick’s electrics performance hot shot starter motor unit 31200-286-405

Universal Motorcycle Rick’s Electrics Performance Hot Shot Starter Motor Unit ~ Replaces 31200-286-405

$249.95 USD
99-4940
Upgrade your classic Honda motorcycle’s starting system with this Rick’s Electrics Brand Performance Hot Shot Starter Motor Unit — an upgraded 4‑brush permanent‑magnet starter...
Nouveau
Honda CB500 CB450 CB360 hot shot rectifier regulator 31400-292-670

Honda CB Hot Shot Rectifier / Regulator ~ Replaces 31400-292-670

$189.95 USD
24-2089
Upgrade your charging system with this Rick's Electric Hot Shot Rectifier/Regulator, replacing OEM #31400-292-670 / #31700-455-671 / #31700-292-008. Combination unit works with the stock...
Comparer

1976 Honda CB360T · Starter & Charging Parts Buying guide

Separate starter-current faults from charging repairs

The starter lead carries current to the motor; its rubber boot protects the terminal. A separate rectifier belongs to the charging circuit and must match the existing connections.

Parts to consider

1968-76 Honda CB360 / CB350 Starter Motor Cable ~ Replaces Honda OEM 32410-286-000 Starter motor cableAftermarket replacement for 32410-286-000, sold individually.Voir la pièce Honda CB Starter Motor Terminal Rubber Boot ~ Replaces 32411-230-000 Starter terminal rubber bootTerminal cover replacing 32411-230-000.Voir la pièce Honda CB Rectifier ~ Replaces 31700-455-671 Separate rectifierReplacement rectifier with a female connector and explicit CB360T application.Voir la pièce

Pièces connexes : Starter solenoid relay · Starter motor seal · Lead-acid regulator/rectifier

Check the lead and terminal protection

Inspect the starter cable’s connections and insulation while investigating weak or intermittent cranking. Check the boot protecting the motor terminal as part of the same job. Compare the cable route and terminal ends against the motorcycle before ordering a replacement lead.

Choose charging parts for the installed system

The featured rectifier is a separate unit with a female connector. The related Hot Shot product combines regulation and rectification and is specified for standard lead-acid batteries only. It is not compatible with lithium-ion batteries; use the correct manufacturer instructions for the installed charging arrangement.

Starter & Charging Parts questions

Can the related Hot Shot unit be used with lithium-ion batteries?

No. This version is specified for standard lead-acid batteries and is not compatible with lithium-ion batteries. Identify the battery chemistry before choosing a charging component, even if its connector appears to match.

Will this lead suit a replacement starter motor?

Compare the installed motor’s terminal arrangement and required cable route first. A changed starter can need a different lead, so use the motor manufacturer’s instructions as well as the cable’s stated replacement reference.

What should I check before ordering the starter seal?

The replacement is specified as 60 × 1.4 and references 31206-286-158 and 31206-402-008. Compare the seal location and the starter fitted to the motorcycle, particularly if the motor has been replaced.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB360T

Votre panier

×