VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB360T — Guidon et commandes

The handlebar choices focus on the points you hold and the clamps securing the bar. Compare the fitted CB360T handlebar with the 7/8-inch application, then decide whether you need closed-end grips, replacement upper clamps or both parts for the refresh.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips end detail 53165-342-670

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670

$17.95 USD
02-2423
Take your early-'70s Honda back to factory spec with these Honda OEM-Type Rubber Grips. Faithful replicas of the original factory grips, in black closed-end...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1976 Honda CB360T · Handlebar Parts Buying guide

Check the bar and controls before choosing the finish

The black replica grips are 135mm long and closed at the outer ends. The black clamp pair suits the listed 7/8-inch bar arrangement, with mounting hardware offered separately from the clamps.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670 Closed-end replica grip pairBlack factory-style rubber grips for 7/8-inch handlebars, measuring 135mm long.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black handlebar clamp pairTwo black upper clamps for the listed 7/8-inch handlebar arrangement. Mounting hardware is separate.Voir la pièce

Allow for the grip ends and throttle

These grips reproduce a closed-end style. Check the available grip area, throttle tube and any bar-end mirrors or accessories before ordering. On a modified handlebar, the nominal bar diameter is only one check; length and the surrounding controls still need to suit the chosen grip.

Inspect the clamp installation as a whole

The clamp pair renews the black upper clamp pieces, with mounting hardware sold separately. Compare the lower mounting arrangement and the fasteners already fitted before ordering. Use the correct service information when tightening the clamps, and check control operation after the handlebar work is complete.

Buying questions

Are the grips genuine Honda parts?

They are factory-style replica rubber grips, with the listed Honda replacement references. The pair is black, closed-ended and 135mm long for the 7/8-inch application. Choose them as replica replacements rather than genuine Honda packaged parts.

Will the closed-end grips work with bar-end mirrors?

Compare the mirror mounting arrangement with the closed outer ends before ordering. These grips are supplied in closed-end form, so a bar-end accessory can require a different grip choice or a separately assessed modification.

Does the clamp pair include mounting bolts?

The black clamp set contains the two clamp pieces, while mounting hardware is offered separately. Inspect the existing fasteners and compare the fitted handlebar mounting arrangement before ordering a complete repair.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB360T

Votre panier

×