VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB360T — Tubes, ressorts, joints et soufflets de fourche

The useful fork choices for the 1975 CB360T include oil seals, short dust boots, screw-on reflectors and replacement top caps. Compare the installed fork before ordering, particularly on a changed front end, and separate the oil-sealing parts from the exterior boots.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB450 CB400 CB360 fork seals

Honda CB450 / CB400 / CB360 Fork Seals

$21.95 USD
27-1019
Replace your CB400 or CB360 fork seals with this Fork Seal Set, 33 x 46 x 11mm. Made in Japan by OEM supplier.Key Features•...
Honda CB450 CB400 CB360 CL360K0 fork dust boot set 91254-413-881

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

$15.95 USD
73-0189
Refresh your fork seal dust boots with this Fork Seal Dust Boots Set of 2. 33mm size. Replaces OEM #91254-413-881.Key Features• Fork seal dust...
Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD
99-5383
This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...
Honda CB400 CB360 CB200 CB175 fork tube cap bolt with o-ring 94605-27101

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461

$17.95 USD
29-6014
This aftermarket fork tube cap bolt with matching O-ring replaces Honda OEM #94605-27101 on compatible Honda CB front forks. It threads into the top...
Comparer

1975 Honda CB360T · Fork Seals & Boots Buying guide

Match the seals and boots to the installed fork

The oil seals measure 33 × 46 × 11 mm and the dust boots are a two-piece 33 mm set. Check both during the same inspection, then assess cap threads and reflector mounts separately if those parts need attention.

Parts to consider

Honda CB450 / CB400 / CB360 Fork Seals 33 × 46 × 11 mm fork sealsJapanese-made fork oil seal set for the CB360T application.Voir la pièce Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881 33 mm fork dust bootsSet of two dust boots, replacing reference 91254-413-881.Voir la pièce Honda CB Stock Type Reflector ~ Replaces 33741-340-670 Screw-on reflectorStock-type reflector with a 6 mm thread, referencing Honda 33741-340-670.Voir la pièce

Pièces connexes : Individual fork cap with O-ring

Order oil seals and dust boots by condition

The oil seal set and dust-boot pair are sold as separate products. Check the existing fork parts for the specified dimensions and shape before ordering either. Use the CB360T service manual for inspection and installation rather than assuming a replacement seal supplies a repair procedure.

Check top-cap and reflector fittings

The linked aftermarket cap includes its O-ring and specifies a 27 mm × 1.0 mm thread with a 17 mm hex. It is sold individually. The reflector uses a 6 mm screw-on fitting; compare that mount separately from the cap when renewing exterior fork parts.

Common buying questions

Should I order oil seals and dust boots together?

Inspect both first. The oil seal set measures 33 × 46 × 11 mm, while the dust boots are a separate pair in 33 mm size. Choose both products when both components need renewal.

What comes with the replacement fork cap?

The linked aftermarket cap includes a matching O-ring and is sold individually. Its specified thread is 27 mm × 1.0 mm, with a 17 mm hex; compare the fork tube before ordering for a changed front end.

Will the screw-on reflector fit replacement fork brackets?

Check for the specified 6 mm thread and compare the mounting arrangement. The reflector is listed for the CB360T, but substituted fork brackets or a different front end may use another fixing style.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB360T

Votre panier

×