VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB360T — Amortisseurs

For an original-style 1975 CB360T shock repair, start with the mounting nuts and joint rubbers. Custom shorty shocks in this selection need a separate assessment of mount type, dimensions and clearance; their presence here does not establish a stock-length replacement.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1975 Honda CB360T · Shocks & Mounting Parts Buying guide

Separate mounting repairs from custom shock choices

The shock-joint rubbers come as a pair, while the nut information specifies two used per motorcycle. Decide whether the job is renewing those mounting pieces or evaluating a complete custom shock set before ordering.

Parts to consider

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000 OEM-type shock mounting nutReplica nut referencing 90309-315-000; two nuts are specified per motorcycle.Voir la pièce Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Shock joint rubber pairSet of two replacement joint rubbers, referencing Honda 52484-292-000.Voir la pièce

Pièces connexes : Custom chrome 290 mm eye-to-clevis shocks · Custom black 290 mm eye-to-clevis shocks

Plan the mounting hardware order

The joint-rubber pack contains two rubbers. Inspect the mounting nuts during the same job and compare the existing hardware with the replacement reference. On a motorcycle with non-original shocks, check the actual mounting arrangement before choosing rubber or metal hardware from the model category.

Compare the two linked custom sets

The linked chrome and black shrouded sets both specify 290 mm eye-to-clevis length, a 12 mm ID × 21 mm upper bushing and five-position preload adjustment. Their finish differs, but both require a custom-fit assessment of mounting details and available clearance.

Common buying questions

Are the shock rubbers supplied individually or together?

The joint rubbers are supplied as a set of two and reference Honda 52484-292-000. Compare the rubbers and mounting arrangement on the shocks currently fitted before ordering, particularly if the shocks have been replaced.

Does the shock nut come in a pack of two?

Two nuts are needed for the motorcycle. Confirm the unit quantity before ordering hardware for both sides, then compare the current mounting arrangement if non-original shocks have been fitted.

How do I choose between eye-to-eye and eye-to-clevis shocks?

Match the actual lower mount rather than length alone. The linked 290 mm sets are eye-to-clevis and use 12 mm upper bushings; an eye-to-eye option has a different mounting configuration and needs its own compatibility check.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB360T

Votre panier

×