VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB360T — Jantes, rayons, joints de roue et valves

This 1975 CB360T wheel selection focuses on retaining hardware, an O-ring and a rear-retainer tool. Identify the wheel being serviced before ordering, and compare the existing retainer and wheel assembly rather than using a broad wheel-category name to choose parts.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing removal tool 41231-286-000

Honda CB Rear Wheel Bearing Removal Tool ~ Removes retainer OEM 41231-286-000 / 41231-429-000

$21.95 USD
35-9129
Remove stubborn rear wheel bearing retainers safely with this Rear Wheel Bearing Removal Tool, designed specifically for Honda locking rings. This tool is built...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing retainer 41231-286-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-286-000

$31.95 USD
73-1068
Secure your rear wheel bearing properly with this Rear Wheel Bearing Retainer – Brake Disc Side, designed as a direct replacement for the original...
Nouveau
Honda CB front wheel gear box retainer o-ring 91307-MB0-003

Honda CB Front Wheel / Gear Box Retainer O-Ring ~ Replaces 91307-MB0-003

$4.50 USD
03-0783
Seal your front wheel or gearbox retainer correctly with this Front Wheel / Gear Box Retainer O-Ring, size 54 x 2, replacing OEM #91307-MB0-003...
Comparer

1975 Honda CB360T · Wheel Retainers & Tools Buying guide

Match the retainer and tool to the wheel position

The front retainer and its O-ring are replacement parts. The rear-retainer tool is workshop equipment for specified locking rings, so plan its use separately and compare the ring that is actually fitted before selecting it.

Parts to consider

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000 Front wheel bearing retainerReplacement front retainer referencing Honda 44643-300-000.Voir la pièce Honda CB Front Wheel / Gear Box Retainer O-Ring ~ Replaces 91307-MB0-003 Front wheel retainer O-ringSize 54 × 2; references include 91307-MB0-003 and 91302-317-700.Voir la pièce Honda CB Rear Wheel Bearing Removal Tool ~ Removes retainer OEM 41231-286-000 / 41231-429-000 Rear bearing-retainer toolFor rings referencing 41231-286-000 or 41231-429-000; 22 mm hex and 3/8-inch square drive.Voir la pièce

Separate the front retainer and O-ring

The front bearing retainer references 44643-300-000. The separately offered O-ring is size 54 × 2 and includes references 91307-MB0-003, 91307-MB0-000 and 91302-317-700. Compare the old ring and seal, especially if the wheel or hub has been changed.

Select the tool for the retaining ring

The rear tool is made for retaining rings referencing 41231-286-000 and 41231-429-000. It offers a 22 mm hex and 3/8-inch square drive. Confirm engagement with the existing ring and follow the correct wheel-service procedure rather than treating it as a universal bearing puller.

Common buying questions

Does the rear tool pull the bearing out of the wheel?

Its specified job is removing the rear bearing retaining ring. Match it to references 41231-286-000 or 41231-429-000, then use the correct service procedure and equipment for the remaining bearing work.

Can I use the same tool on the front retainer?

The tool information specifies rear retaining rings, while the front replacement references 44643-300-000. Check the required front-retainer tool and engagement separately; shared presence in this category does not establish tool interchangeability.

Should I order the front retainer and O-ring together?

Inspect both parts first. The retainer and size 54 × 2 O-ring are separate products. Compare their condition and references to the installed wheel, particularly if a replacement hub has been fitted.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB360T

Votre panier

×