VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB360T — Pièces de bras oscillant

The 1975 CB360T swingarm selection includes replacement pivot-end dust caps and bronze bushing pairs. Inspect the installed swingarm and identify the worn position before ordering; the swingarm pivot and lower shock mount use different components even though both appear near the rear suspension.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Épuisé
Honda CB750 CB650 performance kibblewhite bronze swingarm bushing set 52108-457-300

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300

$69.95 USD
28-1038
Upgrade your swingarm bushings with this Kibblewhite High Performance Bronze Swingarm Bushing Set of 2, replacing OEM #52108-457-300 / #52108-422-300. Made in the USA...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Comparer

1975 Honda CB360T · Swingarm Pivot Parts Buying guide

Choose parts for the pivot you are actually servicing

The dust caps and bronze bushings are separate two-piece sets. Compare the existing pivot parts with those choices and check whether the motorcycle still has its original swingarm before planning a more extensive rebuild.

Parts to consider

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000 Swingarm pivot dust capsSet of two caps for the pivot ends, referencing Honda 52144-362-000.Voir la pièce Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300 Kibblewhite bronze bushing pairTwo bronze swingarm bushings, made in the USA; references include Honda 52108-457-300.Voir la pièce

Plan the two sets as separate purchases

The dust caps are supplied as a pair for the ends of the swingarm pivot. The Kibblewhite bronze bushings are another two-piece set. Inspect both components before ordering, then choose the caps, bushings or both according to the work needed on the pivot.

Compare the bronze bushing choices

Both the featured Kibblewhite option and the linked gunmetal bronze option supply two bushings and include CB360T applicability. The Kibblewhite set is made in the USA and references 52108-457-300. Match the existing swingarm before selecting either, especially if it has been replaced.

Common buying questions

How many dust caps and bushings are in each set?

The dust-cap set contains two caps and the Kibblewhite bushing set contains two bronze bushings. They are separate products, so choose both sets when both components need renewal during the pivot service.

Are these the bushes for the lower shock mounts?

The bronze pairs are for the swingarm pivot. Identify the worn position before ordering for the lower shock mounts, which use separate components; the broad rear-suspension location alone is not enough to choose a bush.

What distinguishes the Kibblewhite and gunmetal bronze options?

Both are two-piece bronze swingarm bushing sets with CB360T applicability. The Kibblewhite set is identified as made in the USA and includes reference 52108-457-300; compare that information with the existing swingarm before choosing.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB360T

Votre panier

×