VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB360G — Clignotants, supports, cabochons et réflecteurs

The 1974 CB360G signal selection includes replacement stays, lamp gaskets and screw-on reflectors. Decide whether the repair concerns mounting, sealing or a reflector before ordering. Stay lengths vary, so measure the fitted pieces rather than relying on the model label alone.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Honda CB750 CB550 CB500 CB360 rear turn signal stay 33441-369-000

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...
Comparer

1974 Honda CB360G · Signal Mounts & Seals Buying guide

Match the signal body and its mounting

Keep lamp sealing separate from stay length. A lens gasket needs the matching housing, while a replacement stay must suit the mounting position and clearance around the motorcycle.

Parts to consider

Honda CB Front Turn Signal Stay Chrome front signal stay65mm body plus 25mm thread, giving 90mm total length. Compare those measurements with the mounting on the bike.Voir la pièce Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671 Turn-signal lens gasketReplacement gasket referencing 33443-268-671, for the compatible stock-type signal lens and lamp.Voir la pièce Honda CB Stock Type Reflector ~ Replaces 33741-340-670 Screw-on reflectorStock-type replacement reflector with a 6mm thread and reference 33741-340-670.Voir la pièce

Pièces connexes : 125mm extended rear signal stay

Read the stay measurements carefully

The featured front stay has a 65mm body, a 25mm thread and a 90mm overall length. The linked rear stay is a 125mm extended-length choice. Compare like-for-like measurements and surrounding clearance; those descriptions do not make both stays the same length or position.

Match seals to the lamp in use

The gasket references 33443-268-671 and is associated with the compatible stock-type signal lamp and amber lens. Inspect the housing and lens shape on the bike before ordering, particularly where smaller custom lamps or mixed-year signal assemblies have been installed.

Buying questions

Is the linked rear stay a standard-length replacement?

It is sold as an extended-length rear stay measuring 125mm. Measure your fitted stay and check the clearance you need before selecting it; do not order it simply because it shares the CB360G application.

Will the gasket fit a custom turn signal?

Only choose it when the custom lamp uses the matching gasket profile. This gasket references 33443-268-671 for the compatible stock-type lamp; model fitment does not establish compatibility with an unrelated replacement housing.

How does the replacement reflector attach?

It is a screw-on reflector with a 6mm thread. Check that the existing reflector mount accepts that thread and has suitable clearance, especially on a modified fork bracket or rear mounting arrangement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB360G

Votre panier

×