VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB350K2 — Alimentation en carburant

Fuel-system work on the 1970 CB350K2 should begin with the carburetors and tank actually fitted. Confirm bowl shape, intake-holder condition and tank connections before choosing repair kits, rubber parts or a petcock for this twin-carburetor motorcycle.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Nouveau
Honda CB550 CB500 CB360 rear fuel tank holder rubber 17613-286-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000

$9.95 USD
12-0133
Restore proper rear fuel tank mounting on your mid-'70s twin or four with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM...
Nouveau
Épuisé
Honda CB1000 CB900 CB750 fuel tank emblem clamp nut 87311-634-600

Honda CB Fuel Tank Emblem Clamp Nut ~ Replaces 87311-634-600

$6.25 USD
99-5267
Secure your fuel tank emblem properly with this Fuel Tank Emblem Clamp Nut, designed as a direct replacement for the original Honda hardware. This...
Honda CB550 CB500 CB400 CB350 float bowl gasket

Honda CB550 / CB500 / CB400 / CB350 Float Bowl Gasket

$7.00 USD
20-5022
Replace your float bowl gasket with this Float Bowl Gasket (O-ring), fitting the CB500K/CB550 family, CB350F Supersport, and CB350K.Key Features• Float bowl gasket (O-ring)Fitment...
Honda CB450 CB360 CB350 CL350K0 CL350K2 fuel petcock 16950-292-000

Honda CB Fuel Petcock ~ Replaces 16950-292-000

$34.95 USD
29-0542
Replace your CB450, CL450, CB350, or CB360 fuel petcock with this Fuel Petcock, replacing OEM #16950-292-000 with M16 x 1.5 threads. Please verify the...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Universal motorcycle carburetor synchronizer vacuum gauge 2 carb synchronizer

Universal Motorcycle Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

$54.95 USD
37-0003
Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki,...
Voir les détails
Honda CB350 CL350K0 CL350K2 CL350K3 float needle and seat 16011-287-004

Honda CB Float Needle & Seat ~ Replaces 16011-287-004

$13.95 USD
48-1519
Replace your CB350 or CL350 float needle and seat with this Float Needle & Seat, made in Japan, replacing OEM #16011-287-004.Key Features• Float needle...
Universal motorcycle 49mm chrome cap pod air filter

Universal Motorcycle 49mm Chrome Cap POD Air Filter

$24.95 USD
15-0034
49mm Chrome Cap POD Air Filter for custom or restoration work on classic Honda CB motorcycles. Measure the outside diameter of the carburetor inlet...
Voir les détails
Honda CB350 CL350 slow pilot jet #38 99124-286-0380

1968-73 Honda CB350 / CL350 Slow / Pilot Jet #38 ~ Replaces 99124-286-0380

$7.00 USD
48-1588
Restore clean idle and low-speed fuel metering with this aftermarket Keihin-style slow / pilot jet, size #38. It replaces Honda OEM #99124-286-0380 for select...
Honda CB350 CL350K0 CL350K2 carb holder w gasket 16211-286-040

Honda CB Carb Holder with Gasket ~ Replaces 16211-286-040

$27.03 USD
48-1473
Replace a single CB350 or CL350 carb holder with gasket using this Carb Holder with Gasket, replacing OEM #16211-286-040 (holder) and #16229-369-000 (gasket).Note: this...
Honda CB front fuel tank rubber cushion 17611-KE8-000

Front Fuel Tank Rubber Cushion ~ Replaces Honda OEM 17611-KE8-000

$5.50 USD
27-5520
This aftermarket front fuel tank rubber cushion replaces Honda OEM 17611-KE8-000 on the listed Honda CB-series applications. It mounts to the frame and supports...
Honda CB550 CB500 CB400 CB350 secondary main jet 68 99202-601-0680

Honda CB Secondary Main Jet #68 with O-Ring ~ Replaces 99202-601-0680

$5.95 USD
48-1586
Replace a worn, damaged, or incorrect secondary main jet on compatible Honda CB Keihin carburetors with this aftermarket Keihin-type press-fit main jet in size...
Nouveau
Honda CB350K CL350K carb rebuild kit

1970-73 Honda CB350K / CL350K Carb Rebuild Kit

$18.95 USD
48-1393
Rebuild your round-carb-bowl CB350 or CL350 with this Carb Rebuild Kit, designed for carbs with ROUND CARB BOWLS.Note: each kit rebuilds one carb, order...
Nouveau
Honda CB350 CL350K0 CL350K1 CL350K2 CL350K3 carburetor screw kit

Honda CB Carburetor Screw Kit

$17.57 USD
48-0795
Refresh your CB350 or CL350 / SL350 carb screws with this Carburetor Screw Kit. Enough for 2 carbs. Get a new set of screws...
Honda CB350K CB350G CL350K SL350 chrome carburetor top cover 16014-286-000

Honda CB350K / CB350G / CL350K / SL350 Chrome Carburetor Top Cover

$24.95 USD
13-0011
Aftermarket chrome carburetor top cover for the Honda 350 models listed below. It replaces a worn, damaged or missing original carburetor top cover.Product Details...
Honda CB500T CB450 CB360 CB350 slow pilot jet #35 99124-286-0351

Honda CB500T / CB450 / CB360 / CB350 Slow / Pilot Jet #35 ~ Replaces 99124-286-0351

$7.00 USD
48-1587
Restore clean idle and low-speed fuel metering with this aftermarket Keihin-style slow / pilot jet, size #35. It replaces Honda OEM #99124-286-0351 for the...
Honda CB350 press fit primary main jet #60 99201-601-0600

1968-73 Honda CB350 Press Fit Primary Main Jet #60 ~ Replaces 99201-601-0600

$6.36 USD
48-1585
Restore clean carburetor fuel metering on your Honda CB350 with this aftermarket press-fit primary main jet, size #60, supplied with the sealing O-ring. It...
Nouveau
Honda CB700 CB650 CB550 fuel tank front rubber cushion 17611-KE8-000

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000

$17.95 USD
99-5145
This genuine Honda front fuel tank rubber cushion mounts to the frame and supports the front of the gas tank on select classic Honda...
Épuisé
Honda CB350 CL350K0 CL350K1 carb diaphragm rubber 16022-287-004

Honda CB Carb Diaphragm Rubber ~ Replaces 16022-287-004

$23.45 USD
48-1985
Replace your carburetor top diaphragm rubber with this Carburetor Top Diaphragm Rubber. Outer dimension 72mm, inner dimension 25mm. Replaces the diaphragm rubber on Honda...
Honda CB350 CB125 CB100 CB77 CB72 carb float 16013-286-014

Honda CB Carb Float ~ Replaces 16013-286-014

$22.95 USD
20-6500
Replace your carb float with this Carb Float with Pin, replacing OEM #16013-286-014. Fits the CB350F 1973, CB350K/CL350K/SL350, and the earliest classics including CB72/CB77...
Comparer

1970 Honda CB350K2 · Fuel System Buying guide

Trace the fuel path before choosing repair parts

Tank fittings, carburetor internals and intake holders solve different problems. Identify the faulty area, compare the existing components and count packages by carburetor before ordering parts for the K2 fuel system.

Parts to consider

1970-73 Honda CB350K / CL350K Carb Rebuild Kit Round-bowl carb rebuild kitFor the listed 1970–73 CB350/CL350 round-bowl carburetors. Each kit services one carburetor.Voir la pièce Honda CB Carb Holder with Gasket ~ Replaces 16211-286-040 Carb holder with gasketOne carb holder and one gasket, replacing references 16211-286-040 and 16229-369-000.Voir la pièce Honda CB Fuel Petcock ~ Replaces 16950-292-000 M16 × 1.5 fuel petcockReplacement petcock with M16 × 1.5 mm tank threads, listed against reference 16950-292-000.Voir la pièce

Pièces connexes : Carburetor float with pin · Carburetor diaphragm rubber · Chrome fuel tank cap

Count carburetor packages carefully

Each round-bowl rebuild kit services one carburetor. The holder package also contains one holder and one gasket. Work out whether one side or both need attention, and compare the existing parts before treating the motorcycle’s two carburetors as one package.

Preserve the installed setup when choosing jets

Record carburetor identification, jet markings and any intake or exhaust changes before choosing metering parts. A model label alone does not resolve primary, secondary and slow-jet choices. For a tank repair, separately verify the filler cap design and petcock connection.

Common buying questions

Does one rebuild kit service both carburetors?

No. The round-bowl kit services one carburetor. Two kits are needed when rebuilding both carburetors of a matching pair; verify bowl shape and the actual carburetor application first.

Will the petcock fit a replacement tank?

Check for the specified M16 × 1.5 mm tank thread, then compare outlet direction and available space. The original motorcycle application does not establish the fitting on an aftermarket or swapped tank.

Can I select jets from the motorcycle year alone?

Identify the fitted carburetor and the jet’s circuit, physical style and size first. Previous carburetor swaps or intake and exhaust changes can make a year-only choice unsuitable.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB350K2

Votre panier

×