VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB350K2 — Suspension et roues

The CB350K2 has early fork service requirements and a steering arrangement without the earlier friction damper. Choose seals, bearings and rear suspension fittings for the assemblies actually fitted. Pay particular attention to replacement shock dimensions instead of assuming a broad stock-length description applies.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB1000 CB900 CB750 CB550 chrome steering stem nut 90304-415-000

Honda CB Chrome Steering Stem Nut ~ Replaces 90304-415-000

$9.95 USD
49-0786
Replace your steering stem nut with this Chrome Steering Stem Nut, hex nut size 30mm, replacing OEM #90304-415-000.Sold each. We also offer the matching...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB1000 CB900 CB750 CB550 steering stem washer 90503-283-000

Honda CB Steering Stem Washer ~ Replaces 90503-283-000

$3.50 USD
49-0787
Replace your steering stem washer with this Chrome Steering Stem Washer, replacing OEM #90503-283-000.Sold each, order the quantity you require.Key Features• Chrome steering stem...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing removal tool 41231-286-000

Honda CB Rear Wheel Bearing Removal Tool ~ Removes retainer OEM 41231-286-000 / 41231-429-000

$21.95 USD
35-9129
Remove stubborn rear wheel bearing retainers safely with this Rear Wheel Bearing Removal Tool, designed specifically for Honda locking rings. This tool is built...
Honda CB black 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...
Honda CB750 CB650 CB550 CB450 CB400 steering bearing kit (2)

Honda CB Steering Bearing Kit (2)

$69.95 USD
28-2011
Upgrade your steering bearings with this Steering Bearing Kit. Tapered roller steering bearing conversion kit, superior to OEM quality with 10X the contact area...
Honda CB750 CB550 front reflector rubber base 33743-341-670

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB650 CB550 CB450 CB400 steering bearing kit

Honda CB Steering Bearing Kit

$69.95 USD
28-2011
Upgrade your steering bearings with this Steering Bearing Kit. Tapered roller steering bearing conversion kit, superior to OEM quality with 10X the contact area...
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB black and chrome 335mm stock length shock absorber set

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD
99-5383
This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing retainer 41231-286-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-286-000

$31.95 USD
73-1068
Secure your rear wheel bearing properly with this Rear Wheel Bearing Retainer – Brake Disc Side, designed as a direct replacement for the original...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Honda CB450 CB400 CB350 CB200 swingarm dust seal cap 52144-356-005

Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005

$24.95 USD
99-5170
This genuine Honda swingarm dust seal cap fits at the swingarm pivot / rear fork area on select Honda CB models. It helps cover...
Épuisé
Honda CB750 CB550 black steering stem nut joker machine 90304-415-000

Honda CB Black Steering Stem Nut ~ Joker Machine ~ Replaces 90304-415-000

$47.95 USD
12-0073
Dress up your steering stem with this Joker Machine Black Steering Stem Nut, 30mm hex, replacing OEM #90304-415-000. High-quality CNC-machined and made in the...
Honda CB350 CL350K0 CL350K1 CL350K2 fork seals

Honda CB350/CL350K0/CL350K1/CL350K2 Fork Seals

$19.50 USD
27-1005
Replace your early CB350 or CL350 fork seals with this Fork Seal Set, 33 x 44 x 8.9mm. Made in Japan by OEM supplier.Key...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1970 Honda CB350K2 · Suspension & Wheel Buying guide

Identify the front end and rear mounting points

Fork seals, steering bearings and swingarm hardware address different wear points. Begin with the original K2 specifications, then verify any changed front end, wheel or shock assembly before selecting parts for the repair.

Parts to consider

Honda CB350/CL350K0/CL350K1/CL350K2 Fork Seals Early fork seal set33 × 44 × 8.9mm replacement seals for the early CB350 fork application.Voir la pièce Honda CB Steering Bearing Kit Tapered steering bearing kitConversion kit with upper and lower tapered bearing races.Voir la pièce Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005 Genuine swingarm dust capGenuine Honda replacement cap for the swingarm pivot area; sold individually.Voir la pièce

Pièces connexes : Shock joint rubber pair · Lower shock-mount bushing · Rear wheel bearing retainer

Check before converting steering bearings

The tapered kit is a conversion choice rather than a packet of loose original-style balls. Compare the stem and frame assembly if either has changed, and use the kit instructions for installation. The K2 does not use the earlier model’s steering damper.

Measure replacement shocks carefully

Honda’s original-through-K3 rear-cushion drawing, applicable to the K2, gives 315mm between mounting axes with an upper eye and lower clevis. Verify dimensions and clearances before selecting any different-length shock. Broad catalog fitment does not establish that a 335mm unit preserves K2 ride height.

Buying questions

Will the fork seals fit a later front-end swap?

Identify the forks actually installed and compare their seal dimensions. The featured 33 × 44 × 8.9mm set is for the early CB350 application; the frame’s model year cannot establish the seal size of replacement forks.

Is the tapered steering kit an original ball-bearing replacement?

It is a tapered-roller conversion kit with upper and lower races. Choose it as a complete bearing-system change and follow its instructions, rather than mixing the new tapered components with an existing loose-ball arrangement.

Can I choose shocks by the stock-length label alone?

No. The K2 factory drawing shows 315mm between mounting axes, and mounting style also matters. Check the actual eye, clevis and clearances before ordering; a broadly applied 335mm stock-length label is not sufficient evidence of original K2 geometry.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB350K2

Votre panier

×