Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1972 Honda CB350F0 · Engine Buying guide
A routine oil change, an external leak and a cylinder rebuild need different parts lists. Separate original-housing service pieces from conversion hardware, then work through the four cylinders and sealing locations individually.
Stock-type oil filterPaper filter element for the original housing. Housing seals, spring and washer are separate service pieces.Voir la pièce
Nine-piece engine seal kitShared CB350F/CB400F assortment with crankshaft, gearshift and other engine seals; the clutch-cover seal is marked for CB400F.Voir la pièce
47 mm piston kitOne standard-size piston with rings, pin and two clips. Four kits cover all four cylinders.Voir la pièce
Pièces connexes : CB350F cam chain · Eight primary-drive dampers · Rings for one piston
The original filter arrangement uses a paper element with separate housing hardware. A spin-on conversion replaces that arrangement, so identify what is installed before ordering a filter or bolt. Honda describes this engine as wet-sump; choose service parts for the Four rather than following separate-oil-tank assumptions.
A standard piston kit supplies one piston, rings, pin and clips. Four kits cover the engine, but only after cylinder measurements support standard-size parts. The linked primary-drive rubber set belongs inside the engine, while the linked cam chain serves the overhead camshaft; neither is the rear-wheel chain.
No. Each kit supplies one 47 mm standard piston with rings, pin and two clips. The CB350F has four cylinders, so a full matching piston replacement uses four kits after the bores have been measured.
The kit covers both CB350F and CB400F applications and includes a clutch-cover seal marked for CB400F. Match each seal to the disassembled engine; nine supplied pieces do not mean nine identical CB350F installation positions.
Use CB350F0 and the four-cylinder engine identification. Honda also sold CB350 twins, and their engine parts should not be assumed interchangeable. For a swapped engine, use its identification and the actual component dimensions.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.