VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB450K — Pièces de bras oscillant

Map the components needing service at your 1972 CB450K swingarm before choosing bushings, felts or metal caps. The individually supplied shock mounting bushing has dimensions separate from the pivot parts. Identify the thrust component and sealing pieces, then inspect retained pivot hardware and fittings.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD
29-7024
Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...
Comparer

1972 Honda CB450K · Swing Arm Parts Buying guide

Use the stated bushing dimensions at the shock connection

The shock bushing is 19mm long with 22mm OD and 10mm ID. Bronze thrust bushings, pivot felts and metal caps are separate two-piece sets with different references. Pivot locknut, washer and grease fittings have their own contents.

Parts to consider

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300 Two bronze thrust bushingsSet of two replacing 52109-283-300. Compare the pivot component required; the listing does not provide all dimensions for an altered swingarm.Voir la pièce Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000 Individual shock-to-swingarm bushing40548-268-000 replacement, sold each, measuring 19mm length × 22mm OD × 10mm ID. Its application is the shock connection, separate from pivot bushings.Voir la pièce Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000 Two pivot felts, left and right52145-283-000 replacement set identifying left and right pieces. Inspect the corresponding metal caps and bushings as separate components.Voir la pièce

Pièces connexes : Two metal pivot end caps · Pivot locknut with washer · Grease fitting nipples, pack of two

Identify what remains outside the pivot fastening purchase

The locknut-and-washer product names 90354-268-000 and 90526-268-000, without a pivot bolt or sleeve described as included. Inspect those retained parts and the sealing arrangement before ordering. Felts, caps and bushings are separate products whose two-piece packages do not define one complete pivot overhaul kit.

Check the grease fitting connection before selecting by quantity

The nipple product supplies two against reference 96201-30001, with the label A .45 rather than a complete thread specification. Compare the fitting and mounting point actually present. Confirm missing connection details where the swingarm or fitting was changed, instead of interpreting that label as a measured thread or angle.

CB450K buying questions

Which dimensions belong to the rear shock mounting bushing?

The 40548-268-000 bushing is listed at 19mm length, 22mm outside diameter and 10mm inside diameter, sold individually. Those dimensions apply to the shock-to-swingarm connection. Identify the separate pivot bushings by their own references and measurements.

Do the metal end caps supply the left and right felts too?

The cap product supplies two metal pieces against 52144-283-010. Left and right felts are separately listed under 52145-283-000. Inspect both types and plan replacements by component rather than treating the cap purchase as a combined sealing set.

Does the grease fitting’s A .45 label document the mounting thread?

The description gives that label and reference 96201-30001 but no complete thread dimension. Compare the original fitting and the swingarm connection, then confirm the required specification when needed. Do not derive a thread size or mounting angle from the ambiguous label.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB450K

Votre panier

×