VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB450K — Échappement

Prepare exhaust-area purchases for your 1972 CB450K by identifying the port gasket or stand stopper required. The seals are supplied individually or ten per pack. The rubber stop has a separate function and Honda reference, so its mounting fit needs an independent comparison.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Échappement

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB kick stand stopper rubber 95011-61000

Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000

$2.95 USD
07-4624
Replace a worn kick stand stopper with this Kick Stand Stopper Rubber "A", a direct replacement for OEM #95011-61000. Exceptionally broad fitment across the...
Honda CB500 CB450 CL450K2 exhaust headpipe gasket (each) 18291-283-010

Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18291-283-010

$3.58 USD
17-2817
Replace one exhaust port gasket on your CB500T or CB450/CL450 with this Exhaust Port Gasket, 1 piece, replacing OEM #18291-283-010 / #18291-ME9-000 / #18291-MM8-880.Sold...
Honda CB500 CB450 exhaust headpipe gaskets (pk 10) 18291-283-010

Honda CB Exhaust Headpipe Gaskets ~ (Pk/10) ~ Replaces 18291-283-010

$29.95 USD
17-3817
Stock up on exhaust port gaskets for your CB500T or CB450/CL450 with this 10-pack, replacing OEM #18291-283-010 / #18291-ME9-000 / #18291-MM8-880.Key Features• Exhaust port...
Comparer

1972 Honda CB450K · Exhaust Buying guide

Use the required joint or mounting point to narrow the choice

Port-seal references 18291-283-010 / 18291-ME9-000 / 18291-MM8-880 are shared by both gasket packages. Rubber A replaces 95011-61000. Compare the fitted sealing or stop arrangement before calculating quantity or assuming additional hardware comes with the purchase.

Parts to consider

Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000 Rubber A stand stopperKick stand stopper referenced to Honda 95011-61000. Compare the fitted stop arrangement; exact measurements and supplied quantity are not stated.Voir la pièce Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18291-283-010 One-piece port-gasket optionIndividual exhaust port gasket with the three stated Honda replacement references. Supplied as one piece; select the count needed for the work.Voir la pièce Honda CB Exhaust Headpipe Gaskets ~ (Pk/10) ~ Replaces 18291-283-010 Ten-piece port-gasket optionBulk pack of ten exhaust port gaskets using the same references. Supplied count does not determine the complete motorcycle’s service requirement.Voir la pièce

Use the single or bulk package after counting joints

The two gasket choices establish different purchase quantities with the same stated replacement references. Calculate the pieces required for the identified service work, then choose the purchasing unit that suits that total. Neither package describes a mandatory motorcycle replacement quantity or includes every exhaust component.

Check the stopper at the mount it will serve

The rubber A listing gives its stand-stopping function and Honda reference, without dimensional drawings or a package count. Compare the actual stop arrangement before choosing it for changed brackets or an altered exhaust area. A general motorcycle application does not establish compatibility with every modified mount.

Buying questions

Can I choose stopper rubber for a custom bracket by the Honda reference alone?

Compare the bracket and stopping arrangement with the intended replacement. The reference identifies rubber A, but exact mounting dimensions are not given. Obtain the missing measurements required by the custom arrangement rather than relying only on the motorcycle’s year or product appearance.

How should I plan gasket quantity when servicing only selected joints?

Count the port seals required by those joints. The individual listing supplies one piece, and a pack supplies ten. Choose quantity for the planned work and any retained stock without treating ten as a stated complete-bike service count.

What should I verify before buying a port seal for changed headpipes?

Identify the sealing part used at the actual engine-side joint and compare its required reference. The listings give no exact gasket dimensions. Confirm the changed assembly’s sealing requirement before selecting either package, and identify separate mounting pieces independently.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB450K

Votre panier

×