VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB450K — Amortisseurs

Choose rear shock parts for your 1972 CB450K after measuring the fitted setup and identifying both mounting ends. The 335mm and 321mm families differ in length and preload positions. Custom shorty sets and separate nuts, washers or joint rubbers need fit and contents checks.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 CB900 type shock absorber washer 90521-292-000

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB black 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB black and chrome 335mm stock length shock absorber set

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Honda CB500 CB550 CB450 CB350 stock design shock absorber set 321mm 52400-455-670XW

Honda CB Stock Design Shock Absorber Set ~ Chrome 321mm

$139.95 USD
06-3642
Restore factory-look rear suspension with this Stock-Design Shock Absorber Set, modelled after the original OEM shocks on a range of CB500, CB550, CB450/CL450, and...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1972 Honda CB450K · Shock Absorbers Buying guide

Compare the exact mounts before choosing a length or finish

The 335mm chrome set includes mounting accessories and a wrench, while the stock-design set states 321mm and five preload positions. The shorty family is custom. Separate OEM-type nuts and washers state two used per motorcycle without clear supplied pack counts.

Parts to consider

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm Chrome 335mm set with mounting accessoriesEye-to-clevis shocks with four preload positions. Bushings, inserts, washers and preload wrench are stated as included; verify any separate fastening requirements.Voir la pièce Honda CB Stock Design Shock Absorber Set ~ Chrome 321mm Chrome stock-design shocks, stated 321mmChrome body, cover and springs with five preload positions and four Honda replacement references. Compare the center-of-eye-to-clevis measurement with the installed setup.Voir la pièce Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm Custom chrome 290mm eye-to-clevis shocksFive preload positions and 12mm ID × 21mm upper bushing stated. Shorter-than-stock custom application; confirm lower mount dimensions and the intended clearance.Voir la pièce

Pièces connexes : OEM-type shock nut, reference 90309-315-000 · OEM-type shock washer, reference 90521-292-000 · Two joint rubbers, reference 52484-292-000

Use the mounting-parts references without assuming shared contents

The separate nut replaces 90309-315-000 and washer replaces 90521-292-000. Each describes two used per bike without clearly defining the supplied pack count. Compare the chosen shock set’s included accessories and the retained fastening arrangement before deciding which additional pieces and purchase quantities are needed.

Keep custom shorty mount forms distinct

Three shorty choices describe eye-to-clevis mounting with a 12mm ID × 21mm upper bushing. The black eye-to-eye version instead states 10mm ID × 21mm bushings at both ends. Identify the exact product and installed attachments; shared 290mm length does not make those mount forms interchangeable.

CB450K buying questions

Do two washers used per motorcycle arrive as a supplied two-piece pack?

The OEM-type washer description gives the motorcycle requirement, without a clear supplied pack count. Confirm purchase quantity for reference 90521-292-000 and compare the fastening pieces already included with your selected shocks before ordering separate washers for the repair.

Are the lower clevis dimensions stated for the chrome shorty set?

The listing gives a 12mm ID × 21mm upper bushing but not the lower clevis opening width or lower bolt diameter. Compare the actual lower attachment and confirm those dimensions before choosing the custom 290mm eye-to-clevis set.

Will selecting a product named stock length preserve the original ride height?

The available descriptions give different 321mm and 335mm measurements rather than one verified factory CB450K specification. Compare the intended setup, measurement method and mounts directly. The family name alone does not confirm the geometry or clearance of a changed installation.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB450K

Votre panier

×