VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB450K — Jantes, rayons, joints de roue et valves

Prepare hub service parts for your 1972 CB450K from the wheel and component being repaired. The front bearing has a code, while the rear seal has separate dimensions. Compare front and rear retainer references, then confirm quantities without assuming a bearing-and-seal kit from shared application.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Nouveau
Honda CB750 CB500 CB450 rear wheel bearing retainer 41231-283-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-283-000

$26.95 USD
28-4015
Replace your rear wheel bearing retainer with this Rear Wheel Bearing Retainer (sprocket side), replacing OEM #41231-283-000. Used on the sprocket side of the...
Honda CB650 CB550 CB500 CB450 rear wheel seal 34 x 55 x 9

Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9

$5.95 USD
27-9042
Replace your CB650, CB500T/CB550, or CB450K rear wheel seal with this Rear Wheel Seal, 1 piece, 34 x 55 x 9mm. Made in Japan...
Comparer

1972 Honda CB450K · Rims, Spokes, Wheel Seals & Tire Valve Stems Buying guide

Identify the wheel position before comparing references and dimensions

Front bearing 6302-2RS is described with two used per front wheel, without clear supplied pack count. The rear seal explicitly supplies one 34 × 55 × 9mm piece. Retainers differ: front 44643-300-000 and rear sprocket-side 41231-283-000.

Parts to consider

Honda CB 6302-2RS Front Wheel Bearing Front bearing, code 6302-2RSJapanese-made front wheel bearing. Two used per front wheel are stated; confirm supplied pack count before ordering the pieces required for the repair.Voir la pièce Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9 One rear seal, 34 × 55 × 9mmOne-piece rear wheel seal with explicit dimensions, made in Japan by an OEM supplier. Compare the fitted hub and removed seal.Voir la pièce Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000 Front bearing retainer, 44643-300-000Separate front retainer replacement. Match the removed component and front hub; a bearing is not described as included.Voir la pièce

Pièces connexes : Rear sprocket-side retainer, 41231-283-000

Confirm a bearing purchase from its supply statement

The bearing listing identifies 6302-2RS and two used per front wheel, asking buyers to order the required quantity. It does not unambiguously define the supplied pack count. Compare the installed bearing and confirm purchase contents before assuming one order provides both bearing positions or additional hub pieces.

Keep the seal and retainers tied to their stated positions

The rear seal supplies one piece at 34 × 55 × 9mm. The front retainer and sprocket-side rear retainer use different references without a bearing supplied being stated. Identify the wheel and removed component first, especially where a previous owner has replaced the hub or wheel assembly.

CB450K buying questions

Does buying a retainer also supply the bearing it holds?

Neither retainer description states a bearing included. The front bearing is a separate listing with its own code and unclear supplied pack count. Inspect the repair requirements and confirm each purchase rather than treating a retaining part as a complete bearing kit.

Can the rear seal’s dimensions verify a replaced rear wheel automatically?

Compare the removed seal and hub requirements directly with 34 × 55 × 9mm. The stated motorcycle application does not identify every replacement wheel. Confirm those dimensions and the required position before ordering for a hub whose origin differs from the original assembly.

How do I identify the front and rear bearing retainers?

The front retainer replaces Honda 44643-300-000. The rear retainer uses 41231-283-000 and is identified for the sprocket side. Compare the hub position and removed component directly, particularly if the wheels were changed during earlier work.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB450K

Votre panier

×