Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1976 Honda CB550F · Spokes, bearings & wheel dampers Buying guide
Stock front and rear spoke sets serve different wheels. Confirm the fitted hub and rim before selection, then compare bearing codes and retainers. Keep wheel-drive rubber dampers separate from engine primary-drive parts.
Stock 19-inch front spoke setForty cadmium-plated steel spokes; silver spokes and nipples for the listed stock front wheel.Voir la pièce
Stock 18-inch rear spoke setForty silver spokes with forty gold nipples for the 1975–76 CB550F rear wheel.Voir la pièce
Rear wheel drive damper setEight rubbers: four A-type and four B-type. References 41242-323-000 / 41243-323-000.Voir la pièce
Pièces connexes : Individual 6302-2RS front bearing · 6305-2RS rear wheel bearing · Left rear bearing retainer
The front set is for the stock 19-inch wheel with silver spokes and nipples. The rear set is for the stock 18-inch wheel with silver spokes and gold nipples. A custom rim or different hub needs its drilling and spoke arrangement checked; matching wheel diameter and forty holes alone do not establish compatibility.
The front bearing application specifies two 6302-2RS bearings per front wheel, ordered in the quantity needed. Compare the 6305-2RS rear bearing with its removed counterpart and match the separate left retainer. The eight-piece rubber set belongs to the rear wheel drive, with four pieces of each damper type.
The product says two are used per front wheel and directs you to order the quantity required. That describes the motorcycle’s requirement, not a packaged pair. Count the bearings needing replacement and set the order quantity accordingly.
The set is listed for the stock 1975–76 CB550F rear wheel. A different rim or hub can change drilling and spoke fit. Compare the complete wheel arrangement before ordering rather than using the eighteen-inch diameter as the only check.
No. It supplies four A and four B rubbers for the rear wheel drive, references 41242-323-000 and 41243-323-000. The primary-drive rubbers are separate internal engine components, even where both appear in a broad category grid.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.