Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1975 Honda CB500T · Starter & Charging System Buying guide
The charging rectifier uses a female connector and names the 1975-76 CB500T. The starter solenoid relay names this twin under 35850-375-000. The starter clutch diode replaces 31700-124-003 and is not that charging rectifier.
Female-connector rectifierCharging rectifier with a female connector. It replaces 31700-455-671, 31700-358-305, 31700-358-013, 31700-292-008, and 31700-310-003. It names the 1975-76 CB500T, plus CB450, CL450, CB350, and CB360 models. It turns charging output into direct current.Voir la pièce
Starter solenoid relayStarter solenoid relay replacing 35850-375-000 and 35850-286-027. It names the 1975-76 CB500T and the CB500T/CB550 family. It connects battery current to the starter for electric starting. It is not the battery cable and not the diode.Voir la pièce
Starter clutch diodeStarter clutch diode and rectifier replacing 31700-124-003 and 31700-166-008. It names the CB500T among a wide Honda range. It serves the starter clutch circuit. Do not install it where the female-connector charging rectifier belongs.Voir la pièce
Pièces connexes : Starter terminal rubber boot · Starter motor seal · Starter brush set of two
Match the starter seal to 60 by 1.4, numbers 31206-286-158 and 31206-402-008. CB500 and CB550 are named in that wide fitment. Brushes are a set of two, 12mm by 14mm by 6mm, for a Mitsuba 2-brush starter, one insulated lead and one non-insulated lead. Boot 32411-230-000 covers the starter terminal.
The female-connector rectifier replaces 31700-455-671 and the other 31700 numbers with it. Separate titles are rectifier and regulator parts. One replaces 31400-292-670. The other says it is lithium-ion battery compatible. Match the connector and the kind of unit already on the bike before you change charging parts.
The boot is the rubber cover for the starter motor terminal, replacing 32411-230-000. Match that number on the cover you are replacing. It is not the solenoid and it is not the battery cable. Slip it over the terminal so the post stays covered.
Confirm a Mitsuba starter that uses two brushes. Each brush is 12mm by 14mm by 6mm. One has an insulated lead and one has a non-insulated lead. The set replaces 31201-292-158 and 31201-MG9-004. Skip it if the starter is not that type.
Yes, if the cable is cracked, corroded, stiff, or overheated. That starter battery cable replaces 32401-319-010, is sold each, and carries the high starting current. The solenoid replaces 35850-375-000 and 35850-286-027. Fix the damaged lead before you blame the relay, motor, or battery.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.