VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB500T Twin — Poignées

These are black closed-end rubber grips for 7/8 in. bars, 130mm long, replacing 95011-14100 and 95011-14200. The fitment names the 1975-76 CB500T and calls them the factory style used on the earliest bikes. They are not the upper clamp set.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips 95011-14100

Honda OEM Type Closed-End Grips ~ Replaces 95011-14100

$16.95 USD
02-2424
1961 Honda CB72 Motorcycle Parts 1961 Honda CB77 Motorcycle Parts 1966 Honda CB450K Black Bomber Motorcycle Parts 1967 Honda CL450K0 Motorcycle Parts 1968 Honda CB350K0 Motorcycle Parts 1968 Honda CB450K Motorcycle Parts 1968 Honda CL350K0 Motorcycle Parts 1969 Honda CB450K Motorcycle Parts 1969 Honda CB750K Motorcycle Parts 1969 Honda CL450K2 Motorcycle Parts 1970 Honda CB175K4 Motorcycle Parts 1970 Honda CB350K2 Motorcycle Parts 1970 Honda CB450K Motorcycle Parts 1970 Honda CB750K Motorcycle Parts 1970 Honda CL350K2 Motorcycle Parts 1970 Honda CL450K3 Motorcycle Parts 1971 Honda CB175K1 Motorcycle Parts 1971 Honda CB350K3 Motorcycle Parts 1971 Honda CB450K Motorcycle Parts 1971 Honda CB500K Four Motorcycle Parts 1971 Honda CB750K Motorcycle Parts 1971 Honda CL350K3 Motorcycle Parts 1971 Honda CL450K4 Motorcycle Parts 1975 Honda CB400F Motorcycle Parts 1975 Honda CB500T Twin Motorcycle Parts 1976 Honda CB400F Motorcycle Parts 1976 Honda CB500T Twin Motorcycle Parts 1977 Honda CB400F Motorcycle Parts Honda CB Handlebars, Clip-Ons, Clamps & Grips Honda CB Motorcycle Grips & Throttle Sleeves Honda CB175K Motorcycle Parts (1969–1973) Honda CB350 Motorcycle Parts by Model & Year Honda CB350K Motorcycle Parts (1968–1972) Honda CB400 Motorcycle Parts by Model & Year Honda CB400F Motorcycle Parts (1975–1977) Honda CB450 Motorcycle Parts by Model & Year Honda CB450K Motorcycle Parts (1965–1974) Honda CB500 Motorcycle Parts by Model & Year Honda CB500K Motorcycle Parts (1971–1973) Honda CB500T Motorcycle Parts (1975–1976) Honda CB72 Motorcycle Parts (1959–1966) Honda CB750 Motorcycle Parts by Model & Year Honda CB750 SOHC Parts (1969–1978) Honda CB750K Motorcycle Parts (1969–1982) Honda CB77 Motorcycle Parts (1961–1968) Honda CL350K Motorcycle Parts (1968–1973) Honda CL450K Motorcycle Parts (1967–1974) Series 10: CB72-CB250 (59-85) Series 6: CB500-CB550 (71-78) Series 7: CB400-CB450 (65-86) Series 8: CB350-CB400 (72-77) Series 9: CB350-CB360 (69-75)
Fit the correct grips on your earliest-era Honda with these Honda OEM-Type Rubber Grips. Accurate replicas of the factory grips fitted to the oldest...
Comparer

1975 Honda CB500T · Grips Buying guide

Closed-end rubber at 130mm

Match the closed end, the black rubber, and the 130 mm length. Honda 95011-14100 and 95011-14200 are this same grip. Check the quantity so both bar ends are covered.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 95011-14100 Black closed-end grips, 130mmBlack rubber grips with a closed end, 130mm long, for 7/8 in. handlebars. They replace 95011-14100 and 95011-14200 and name the 1975-76 CB500T. The description presents them as the early factory style.Voir la pièce

Only one style is described

The only style described is black, closed-end, and 130mm on a 7/8 in. bar. There is no open end, second color, or other length. If your grips measure differently, do not assume 130mm came off the bike. The 1975-76 CB500T is named, with early CB750K, CB500K, and CB450 models.

Quantity, then the clamps

Check the quantity before you assume a pair. Buy enough for both ends if both are worn. The upper clamps are a separate set of two for the same 7/8 inch bar, replacing 95014-22200, and they do not include this rubber.

Closed end, length, and quantity?

Why are two Honda numbers on one grip?

The description replaces both 95011-14100 and 95011-14200 with the same closed-end grip. It prints one length, 130mm, and one bar size, 7/8 in. Do not split those numbers into two grips or two colors. The color given is black.

Are these the upper clamps?

No. These are the rubber grips. The black clamps are a set of two that pinch a 7/8 in. bar in the upper triple clamp and replace 95014-22200. Use the grips on the bar ends and the clamps on the triple clamp.

How many grips should I buy?

It does not. It describes the grip style and a 130mm length, and it names the 1975-76 CB500T, but it never says pair or each. Check the quantity before you order so both handlebar ends are covered.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB500T Twin

Votre panier

×