VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB500K Four — Joints et quincaillerie moteur

A sealing-parts order for the 1973 Honda CB500K should name the actual leak or opened joint. The head cover, cylinder head and cylinder base use different gaskets. Stock tappet-cap O-rings and the nine-piece oil-seal kit also have their own defined applications.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Joints et quincaillerie moteur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB400 CB350 point plate gasket 30372-300-300

Honda CB Point Plate Gasket ~ Replaces 30372-300-300

$7.50 USD
18-7010
Replace your Contact Point Plate Cover Gasket with this Point Plate Gasket, replacing OEM #30372-300-300. Broad fitment across the SOHC CB750, CB500K/CB550 family, and...
Honda CB750 CB550 CB500 CB350 tach drive oil seal 4.8 x 14.5 x 4 91256-096-651

Honda CB750 / CB550 / CB500 / CB350 Tach Drive Oil Seal ~ 4.8 x 14.5 x 4 ~ Replaces 91256-096-651

$4.95 USD
73-0963
Replace your tach drive oil seal with this Tach Drive Oil Seal, 4.8 x 14.5 x 4, replacing OEM #91256-096-651. High-quality, made in Japan.Key...
Honda CB750 CB550 valve tappet cover gasket (set 8) 91302-001-020

Honda CB Valve Tappet Cover O-Ring (Set/8) ~ Replaces 91302-001-020

$15.95 USD
18-7069
Replace your valve tappet cover O-rings with this Valve Tappet Cover O-Ring Set of 8, replacing OEM #91302-001-020. Designed for stock-type valve tappet covers...
Honda CB750 CB550 CB650 cylinder head nut cover 91318-300-013

Honda CB750 / CB550 / CB650 Cylinder Head Nut Cover

$3.74 USD
01-0137
Restore the clean look of your cylinder head with this Rubber Cylinder Head Nut Cover, a replacement for OEM Ref. #91318-300-013. Fits all 1969-78...
Honda CB750 CB550 CB500 CB350 kickstart oil seal 18 x 29 x 7 91204-286-003

Honda CB750 / CB550 / CB500 / CB350 Kickstart Oil Seal ~ 18 x 29 x 7 ~ Replaces 91204-286-003

$4.95 USD
73-0962
Replace your kickstart oil seal with this Kickstart Oil Seal, 18 x 29 x 7, replacing OEM #91204-286-003. High-quality, made in Japan.Key Features• Kickstart...
Nouveau
Honda CB550 CB500 CB400 CB350 engine primary drive rubber set 8 23114-323-000

Honda CB550 / CB500 / CB400 / CB350 Engine Primary Drive Rubber Set/8 ~ Replaces 23114-323-000

$32.95 USD
28-6922
Restore smooth power transfer inside the engine with this Engine Primary Drive Rubber Set (Set of 8), designed to replace worn or deteriorated original...
Honda CB750 CB650 cylinder sleeve o-ring gasket set 91304-286-000

Honda CB Cylinder Sleeve O-Ring Gasket Set ~ Replaces 91304-286-000

$4.50 USD
18-7068
Replace your cylinder sleeve O-rings with this Cylinder Sleeve O-Ring Set of 4, replacing OEM #91304-286-000.Key Features• Cylinder sleeve O-rings, 4 per set• Replaces...
Épuisé
Honda CB550F CB550K CB500K alternator cover gasket 11691-323-306

1971-78 Honda CB550F / CB550K / CB500K Alternator Cover Gasket ~ Replaces 11691-323-306

$9.86 USD
18-6999
Replace your CB500K or CB550 alternator cover gasket with this Alternator Cover Gasket, replacing OEM #11691-323-306.Key Features• Alternator cover gasket• Replaces OEM #11691-323-306• Honda...
Honda CB750 CB650 CB550 CB500 crank seal 30 x 42 x 8 91201-300-003

Honda CB Crank Seal ~ 30 x 42 x 8 ~ Replaces 91201-300-003

$7.00 USD
73-0960
Replace your crank seal with this Crank Seal, 30 x 42 x 8, replacing OEM #91201-300-003. High-quality, made in Japan.Note: please reference the OEM...
Honda CB550F CB550K CB500K cylinder head gasket 12251-374-306

1971-78 Honda CB550F / CB550K / CB500K Cylinder Head Gasket ~ Replaces 12251-374-306

$69.95 USD
18-6996
Replace your CB500K or CB550 cylinder head gasket with this Cylinder Head Gasket, replacing OEM #12251-374-306.Key Features• Cylinder head gasket• Replaces OEM #12251-374-306• Honda...
Nouveau
Honda CB500K engine oil seal kit with 9 seals

1971-73 Honda CB500K Engine Oil Seal Kit

$27.95 USD
01-9952
Seal up your CB500K engine rebuild with this 9-piece Engine Oil Seal Kit. A complete bundle matched specifically to the 1971-73 CB500K, saving you...
Honda CB550F CB550K CB500K cylinder head cover gasket 12391-323-000

1971-78 Honda CB550F / CB550K / CB500K Cylinder Head Cover Gasket ~ Replaces 12391-323-000

$41.95 USD
18-6997
Replace your CB500K or CB550 cylinder head cover gasket with this Cylinder Head Cover Gasket, replacing OEM #12391-323-000.Key Features• Cylinder head cover gasket• Replaces...
Honda CB650 CB550 CB500 cylinder base gasket 12191-426-306

Honda CB650 / CB550 / CB500 Cylinder Base Gasket ~ Replaces 12191-426-306

$18.50 USD
18-6993
Replace your CB650 or CB500/CB550 cylinder base gasket with this Cylinder Base Gasket, replacing OEM #12191-426-306.Key Features• Cylinder base gasket• Replaces OEM #12191-426-306• Honda...
Honda CB550F CB550K CB500K Athena gasket set (top end set only)

1971-78 Honda CB550F / CB550K / CB500K Athena Gasket Set (Top End Set Only)

$144.95 USD
18-0435
Freshen up the top end of your CB500 or CB550 with this Athena Top End Gasket Set. Athena of Italy is an original-equipment supplier...
Épuisé
Honda CB500K overhaul gasket set

1971-73 Honda CB500K Overhaul Gasket Set

$129.95 USD
18-0438
Rebuild your CB500K engine with this Overhaul Engine Gasket Set.Key Features• Overhaul engine gasket setFitment / Compatibility• Honda CB500K (1971‑73)Part Number: 18-0438
Honda CB500K Athena overhaul gasket set

1971-73 Honda CB500K Athena Overhaul Gasket Set

$219.00 USD
18-0192
Rebuild your CB500K engine with this Athena Overhaul Engine Gasket Set. Athena of Italy is an original-equipment supplier to Yamaha, Honda, Kawasaki, Suzuki, and...
Comparer

1973 Honda CB500K · Gaskets, Seals and Hardware Buying guide

Name the joint before comparing sealing sets

The head-cover gasket follows the removable top cover, while head and base gaskets seal different cylinder joints. The tappet O-ring set is expressly restricted to stock-type caps; oil seals are another separate purchase.

Parts to consider

1971-78 Honda CB550F / CB550K / CB500K Cylinder Head Cover Gasket ~ Replaces 12391-323-000 Removable head-cover gasketOne gasket is supplied against reference 12391-323-000 for the removable top cover. This is not the cylinder-head gasket that sits between the head and cylinder block.Voir la pièce 1971-73 Honda CB500K Engine Oil Seal Kit Nine named engine oil sealsThe kit lists two crankshaft seals, left and right crankcase seals, gearshift-drum and spindle seals, mainshaft, tach-drive and countershaft seals. Gaskets and O-rings are expressly separate.Voir la pièce Honda CB Valve Tappet Cover O-Ring (Set/8) ~ Replaces 91302-001-020 Eight O-rings for stock-type tappet capsThe set supplies eight seals against 91302-001-020 and is described only for OEM-type tappet covers. Do not assume it fits an aftermarket cap merely because both products list the CB500K.Voir la pièce

Pièces connexes : Head-to-cylinder gasket · Cylinder-to-crankcase base gasket · Alternator-cover joint gasket

Three similar names describe different joints

The head-cover gasket uses 12391-323-000, the head gasket uses 12251-374-306 and the base gasket uses 12191-426-306. Check the removed part and the joint being opened. Similar cylinder-related names do not make those three products alternatives for the same sealing location.

Check cap design as well as model application

The eight-piece tappet O-ring listing limits use to stock OEM-type caps. The finned chrome aftermarket cap is another product that includes its own new gasket. Identify the caps already fitted before choosing seals, and confirm individual contents where a gasket set does not provide an itemized list.

Buying questions answered

Does the nine-piece kit include head and base gaskets?

No. Its stated contents are the nine named oil seals. The current description of its contents leaves cylinder, head, cover and crankcase gaskets plus O-rings as separate engine-sealing products.

Will the eight tappet O-rings fit every replacement cap?

The listing specifically restricts this set to stock OEM-type tappet covers. Compare the installed cap design before selecting it. An aftermarket finned cap can have its own supplied gasket and should be checked separately.

How can I distinguish the head gasket from the head-cover gasket?

The head gasket seals between the cylinder block and head and carries 12251-374-306. The top cover uses 12391-323-000. Match the location and reference instead of choosing from the shared word head.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB500K Four

Votre panier

×