Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1973 Honda CB500K · Fuel System Buying guide
A one-carb rebuild kit and a four-holder intake set use different package counts. The stock-type filter references the original CB500K airbox, while the chrome cap includes its gasket and hinge hardware. Compare the existing assemblies before selecting a combination of parts.
Internal service kit for one CB500K carbThe Japanese-made kit lists gaskets, needle and seat, jets, jet needle, O-rings and small hardware. Four kits service the full four-carb rack.Voir la pièce
Single filter for the original airboxReferences 17210-323-030 for the 1971–73 CB500K; one stock-type filter services the original airbox.Voir la pièce
Chrome cap with sealing and hinge partsReferences 17510-323-310 and includes a gasket, hinge pin and E-clip. The separate latch remains another order choice.Voir la pièce
Pièces connexes : Set of four engine-side carburetor holders · Individual replacement float with pin
The carb kit is explicitly for one carburetor, so four are needed for a complete rack rebuild. Its named internal contents should not be read as a set of intake holders or airbox boots. Those rubber products each have their own four-piece listings and clamp requirements.
A stock airbox filter depends on the original airbox being present. Likewise, cap and petcock service pieces depend on the fitted tank hardware. Identify modifications and compare component references before treating a listed model application as proof that an altered assembly uses the same replacement parts.
The one-carb kit includes bowl and top gaskets, needle-and-seat, jets, D26 needle, O-rings, screw with spring and C-clip. A float is not named in its contents. Compare that list before adding separate valves or gaskets; four kits rebuild the complete rack.
The element references Honda 17210-323-030 for the original 1971–73 CB500K airbox. One is supplied and one services that airbox. Confirm the retained intake before applying the specification; a pod or replacement-airbox conversion needs its own fitment comparison.
The chrome cap already includes its gasket, hinge pin and E-clip under 17510-323-310. The latch is separately offered with its own return spring, pin and C-clip. Check the retained cap and latch before also adding separate seal or hinge-related purchases.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.