VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB900F — Flotteurs et composants de carburateur

For a focused 1982 CB900F carburetor repair, identify the float, passage plug or diaphragm that needs attention before choosing a package. This range includes floats with pins, five-piece passage-plug packs and an accelerator-pump kit. Small sealing parts are offered in several different quantities.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 carb fuel connector tube and accelerator tube

Honda CB Carb Fuel Connector Tube and Accelerator Tube O-Rings

$15.26 USD
73-0831
Replace your carb fuel and accelerator tube O-rings with these Carburetor Fuel Connector Tube and Accelerator Tube O-Rings, 12 O-rings.Key Features• Carb fuel connector...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw o-rings pk 4

Honda CB Float Bowl Drain Screw O-Rings Pk/4

$5.80 USD
48-0792
Replace your float bowl drain screw O-rings with this Float Bowl Drain Screw O-Rings 4-Pack.Key Features• Float bowl drain screw O-rings• 4 per packFitment...
Honda CB1100 CB1000 CB900 CB750 DOHC screw set

Honda CB1100 / CB1000 / CB900 / CB750 DOHC Screw Set

$39.95 USD
73-0099
Refresh DOHC carb hardware top to bottom with this 71-Piece DOHC Screw Set. Includes front stay plate screws (8), CV cap screws (8), throttle...
Honda CB1100 CB1000 CB900 CB750 CB650 carb float 16013-413-851

Honda CB Carb Float ~ Replaces 16013-413-851

$27.95 USD
20-6507
Replace your 1980+ DOHC CB carb float with this Carb Float with Pin, replacing OEM #16013-413-851. Broad fitment across the 1980-82 CB750 family, CB750SC...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB1000 CB900 CB750 carb rubber passage plugs pk 5 16010-425-671

Honda CB1000 / CB900 / CB750 Carb Rubber Passage Plugs Pk/5 ~ Replaces 16010-425-671

$10.49 USD
48-5001
Replace your float bowl and cover access plugs with this Carb Rubber Passage Plugs Pack of 5. Fits in float bowl and cover access...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB900 CB750 CB650 CB450 CB400 air cut off valve 16048-429-771

Honda CB Air Cut Off Valve ~ Replaces 16048-429-771

$26.95 USD
20-4020
Replace your DOHC CB's carb air cut-off valve with this Carb Air Cut-Off Valve, replacing OEM #16048-429-771 (diaphragm) and #16048-425-771 (spring + 1 O-ring).Key...
Honda CB1100 CB1000 CB900 CB750 float bowl screws pk 2 93892-04016-00

Honda CB Float Bowl Screws Pk/2 ~ Replaces 93892-04016-00

$2.50 USD
48-9031
Replace your float bowl screws with this Float Bowl Screws Pack of 2 (with lock washers), 2 screws and 2 washers per pack. These...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB1100 CB1000 CB900 carb felt throttle and choke shaft seal set 12

Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12

$32.95 USD
33-0044
Replace worn or missing felt throttle and choke shaft seals during carburetor service on compatible vintage Honda CB models. These felt seals are used...
Honda CB900 CB450 CB400 carb pump diaphragm 16021-413-751

1980-82 Honda CB900 / CB450 / CB400 Carb Pump Diaphragm ~ Replaces 16021-413-751

$27.03 USD
20-9041
Rebuild your Keihin carb's accelerator pump with this Carb Pump Diaphragm, replacing OEM #16021-413-751 / #16021-438-671 / #16021-463-004. Kit contains 1 diaphragm with rod,...
Honda CB1100 CB1000 CB900 CB750 CB650 carburetor cap screw set 8

Honda CB Carburetor Cap Screw Set/8

$5.80 USD
73-0100
Refresh your DOHC carb cap screws with this Carburetor Cap Screw Set of 8 with metal washers.Key Features• Carburetor cap screw set, 8 pieces•...
Honda CB1100 CB1000 Keihin pd carb felt throttle shaft seal set 6

Honda CB Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$18.95 USD
33-0043
Replace worn or missing felt throttle shaft seals on Keihin PD carburetors. These felt seals are used during carburetor service or restoration to help...
Honda CB900 CB750 CB650 air cut off valve with cover 16048-429-771

Honda CB Air Cut Off Valve With Cover ~ Replaces 16048-429-771

$34.95 USD
48-9029
Replace your carb air cut-off valve with this Carb Air Cut-Off Valve with Cover. Replaces OEM #16048-429-771 (diaphragm), #16048-425-771 (spring + 1 O-ring), and...
Comparer

1982 Honda CB900F Supersport · Carburetor Components Buying guide

Choose the component for the diagnosed fault

Locate the fault before choosing a float, pump diaphragm or sealing pack. The float needle controls fuel entry, the accelerator pump enriches throttle opening, and drain and connector O-rings seal different joints on the CB900F carburetor bank.

Parts to consider

Honda CB Carb Float ~ Replaces 16013-413-851 Float with pinReference 16013-413-851; four floats specified per motorcycle.Voir la pièce Honda CB1000 / CB900 / CB750 Carb Rubber Passage Plugs Pk/5 ~ Replaces 16010-425-671 Five carb passage plugsRubber plug pack referencing 16010-425-671, 16010-461-781 and 16010-469-004.Voir la pièce 1980-82 Honda CB900 / CB450 / CB400 Carb Pump Diaphragm ~ Replaces 16021-413-751 Accelerator-pump diaphragm kitOne diaphragm with rod, bellow rubber and O-rings.Voir la pièce

Pièces connexes : Drain screw with O-ring · Four drain-screw O-rings · Twelve connector-tube O-rings

Keep the slow-jet plug with its own circuit

Honda’s 1982 supplement shows the slow jet beneath a plug, separate from the primary and secondary main jets. Match the installed plug and carburetor construction to the replacement listing. Five plugs in a package does not establish a universal count for every rack.

A drain leak is different from a connector-tube leak

The linked drain screw includes its own O-ring. A seal-only repair can use the separate drain O-rings if the screw and bowl seat are sound. Connector-tube O-rings seal between carburetors and require enough rack separation to remove the tubes; they are a different repair.

Buying questions

Will replacing a float stop every overflowing carburetor?

No. Check that the float moves freely and inspect the float needle, its seat and the fuel inlet for debris or damage. Verify the correct float level for the installed carburetor. A new float cannot repair a damaged needle seat.

How do I choose between drain-screw and connector-tube O-rings?

Trace the leak to its joint. Drain seals fit the individual bowl drain screws; connector seals fit tubes between the carburetors. Inspect the screw tip, groove and bowl seat before buying seals alone, and plan rack separation for connector-tube work.

Why should the slow-jet plug be inspected during a rebuild?

The 1982 Honda diagram places a plug over the slow-jet passage. Check that the correct plug is present and sound and that the passage is clean. Match the actual carburetor version; a five-piece replacement pack does not define every rack’s usage count.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB900F

Votre panier

×