VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB1000C — Tubes, ressorts, joints et soufflets de fourche

Fork service on the 1983 Honda CB1000C calls for two sealing parts: oil seals that keep the damping oil inside the sliders, and a pair of dust wipers that sit above them. Both are produced in Japan and shared with other 39mm big-bore DOHC models.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100F CB1000C CB900F CB650SC fork seal set

1981-85 Honda CB1100F / CB1000C / CB900F / CB650SC Fork Seal Set

$23.05 USD
27-1029
Replace your big-bore DOHC fork seals with this Fork Seal Set, 39 x 52 x 11mm. Made in Japan by OEM supplier.Key Features• Fork...
Nouveau
Universal motorcycle headlight reflector rubber base 33743-425-600

Universal Motorcycle Headlight Reflector Rubber Base ~ Replaces 33743-425-600

$16.95 USD
99-4979
Upgrade or restore your Honda motorcycle’s headlight assembly with this Headlight Reflector Rubber Base — precision‑designed to replace OEM #33743‑425‑600. This rubber base provides...
Honda CB1100F CB1000C CB900F CB650SC fork dust seal set

1981-85 Honda CB1100F / CB1000C / CB900F / CB650SC Fork Dust Seal Set

$26.23 USD
27-1048
Replace your big-bore DOHC fork dust seals with this Fork Dust Seal Set of 2. OEM-quality parts made in Japan.Key Features• Fork dust seal...
Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD
99-5383
This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...
Nouveau
Épuisé
Honda CB1000C CB900C rear shock fork gaitor

1980-83 Honda CB1000C / CB900C Rear Shock Fork Gaitor ~ Genuine Honda OEM

$34.95 USD
99-5459
Upgrade or restore your classic Honda motorcycle with this Rear Shock Fork Gaitor — genuine Honda OEM quality made to the factory specifications. This...
Comparer

1983 Honda CB1000C · Fork Seals Buying guide

Treat the leak and its cause

The oil seal retains fork oil, while the dust seal helps keep contamination away from it. If the fork leaks, inspect the tube and surrounding parts before fitting new seals; damaged running surfaces can compromise a replacement seal.

Fork parts to consider

1981-85 Honda CB1100F / CB1000C / CB900F / CB650SC Fork Seal Set Fork oil seal setSized 39 x 52 x 11mm and produced in Japan for the big-bore DOHC fork.Voir la pièce 1981-85 Honda CB1100F / CB1000C / CB900F / CB650SC Fork Dust Seal Set Fork dust seal setA pair of OEM-quality wipers, also produced in Japan.Voir la pièce

Check the assembled fork before ordering

Oil-seal set 27-1029 is specified at 39 × 52 × 11mm and names the 1983 CB1000C. Dust-seal set 27-1048 is a separate listing. If the front end has been changed, identify the fitted fork rather than selecting both parts from the frame model alone.

Plan the full fork service

A seal driver is an installation tool, not a substitute for the fork-disassembly procedure. The original CB1000C front end is air-assisted and includes an anti-dive arrangement. Use its own service instructions for depressurizing, dismantling and refilling rather than copying another Honda’s quantities or sequence.

Fork questions

Will new dust seals stop oil running down the fork leg?

Dust seals exclude contamination; the oil seal is the oil-retaining component. Inspect the source of leakage and the tube’s condition before choosing parts. Replacing only the outer wiper does not establish that the oil leak has been repaired.

What if the front forks have been replaced with another assembly?

Identify that fork and compare its specified oil seals, dust seals and driver size. The listed CB1000C applications describe the original model arrangement, not every front end that can be installed in its frame.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB1000C

Votre panier

×