VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB1000C — Amortisseurs

Rear shocks for the 1983 Honda CB1000C need to match the Custom length of 325mm eye to eye. Three sets are listed at that length, each with four preload positions. Washers, joint rubbers and a genuine Honda gaiter for the rear fork complete the group.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 type shock absorber washer 90521-292-000

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB900C CB1000C CB650SC 325mm stock length shock absorber set

Honda CB Custom Stock Length Shock Absorber Set ~ Black / Chrome 325mm

$139.95 USD
06-3647
Fit stock-length 325mm rear shocks to your CB900C, CB1000C Custom, or late CB650SC Nighthawk with this Stock-Length Shock Absorber Set. Black body with chrome...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Nouveau
Épuisé
Honda CB1000C CB900C rear shock fork gaitor

1980-83 Honda CB1000C / CB900C Rear Shock Fork Gaitor ~ Genuine Honda OEM

$34.95 USD
99-5459
Upgrade or restore your classic Honda motorcycle with this Rear Shock Fork Gaitor — genuine Honda OEM quality made to the factory specifications. This...
Honda CB650 CB900 CB1000 black shock absorber set stock 325mm length

Black Shock Absorber Set ~ Stock 325mm Length

$139.95 USD
06-3600
Replace your shocks with this Shock Absorber Set, black body with black springs and black end cap. 325mm (12 3/4") eye to eye. 4-position...
Honda CB900C CB1000C CB650SC 325mm stock length shock absorber set

Honda CB Custom Stock Length Shock Absorber Set ~ Black / Chrome 325mm

$139.95 USD
06-3607
Match the shorter CB900C, CB1000C Custom, or late CB650SC rear geometry with this 325mm Stock-Length Shock Absorber Set. Black body with chrome progressive-wound heavy-duty...
Épuisé
Universal chrome 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Eye-to-Eye 290mm

$139.95 USD
06-3593
Pair a shortened chrome look with eye-to-eye mounting using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs, 290mm...
Comparer

1983 Honda CB1000C · Shock Absorbers Buying guide

Compare mounting and adjustment, not just finish

The three selected rear-shock pairs are listed at 325mm with eye-to-eye mounting and four spring-preload positions. Check length, bushing dimensions, mount widths and clearances against the motorcycle before choosing a finish. The original air-assisted shocks use a different adjustment system.

Shock parts to consider

Honda CB Custom Stock Length Shock Absorber Set ~ Black / Chrome 325mm 325mm set, black and chrome with chrome cap325mm eye-to-eye aftermarket pair with chrome springs and chrome end caps.Voir la pièce Honda CB Custom Stock Length Shock Absorber Set ~ Black / Chrome 325mm 325mm set, black and chrome325mm eye-to-eye aftermarket pair with black bodies and chrome springs.Voir la pièce Black Shock Absorber Set ~ Stock 325mm Length 325mm set, all black325mm eye-to-eye aftermarket pair with black springs and end caps.Voir la pièce

Pièces connexes : Shock absorber washer · Shock joint rubber set · Genuine Honda rear-damper boot

Preload is a setup choice

The selected pairs include a preload wrench and installation pieces. Set both replacement shocks consistently according to the supplier’s instructions, then check loaded clearance and suspension operation. Included hardware does not establish that every sleeve or washer is suitable for a modified motorcycle.

Keep the boot and mounting parts distinct

The genuine Honda boot cross-references 52611-463-013 and 52611-463-003 and covers the original rear damper’s exposed rod area. It is separate from the shock-joint rubbers and washers. Its original-shock application does not establish fitment over these aftermarket replacements.

Shock questions

Can I choose the 290mm universal shocks simply because they also have two eyes?

No. Their eye-to-eye construction does not establish CB1000C fitment. The shorter length, mounting dimensions and available travel need checking, along with tire, fender, exhaust and stand clearance. The CB1000C is shaft-driven, so generic chain-clearance advice is not a model-specific approval.

Will the genuine Honda damper boot fit the new 325mm shock sets?

That combination is not documented. The boot is listed for the original rear-damper application, while the replacement pairs have their own bodies, springs and caps. Confirm the actual shock and boot dimensions before ordering them as a matched set.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB1000C

Votre panier

×