Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1983 Honda CB1000C · Fuel System Buying guide
A fuel-system order can mix single-carb kits, complete rubber sets and parts shared by the carburetor rack. Check the package coverage for each item rather than multiplying every line by four. Start with the carburetor identification and the repair you are planning.
CB1000C premium carb kitOne-carb Viton kit; lists #68/#110 mains and a #35 pilot.Voir la pièce
Carb holder set of 4Four holders; the required band clamps are separate.Voir la pièce
Fuel petcockListed replacement for 16950-461-751 with an M20 x 1.0 tank thread.Voir la pièce
Pièces connexes : Air box rubber boot set · Accelerator pump diaphragm · CB1000C choke cable
The holder set covers four holders; its listing specifies four 46–49mm clamps and four 50–52mm clamps. The separate airbox boot set covers four boots and specifies four 60–65mm clamps. Clamps are sold separately, so check the existing hardware before ordering either rubber set.
Pump kit 20-9044 lists one diaphragm with rod, a bellows rubber and O-rings for the compatible Keihin accelerator-pump assembly. Its references are 16021-ME2-751 and 16021-MG1-671. It is separate from the featured single-carb rebuild kit, whose contents do not list the pump diaphragm.
The premium kit lists #68 and #110 main jets and a #35 pilot, matching the numbers Honda gives for the VB55A carburetor covered by its CB1000C manual. Confirm the installed carburetor and applicable specification first; matching these numbers does not verify every supplied part or a modified setup.
No. Check the actual tank thread and sealing arrangement, plus outlet direction, hose size and lever clearance. The featured valve specifies an M20 x 1.0 connection; a tank from another model or an aftermarket tank must be checked on its own.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.