VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB700SC — Amortisseurs

Inspect the shock mounting points on the 1986 CB700SC before choosing replacement hardware or complete shocks. The washer has a specific supported reference. Measure the installed shock arrangement separately if planning a larger change, including the end fittings, bushings and surrounding clearance.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 type shock absorber washer 90521-292-000

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB black 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...
Honda CB750 CB700 CB650 CB550 shock absorber set stock design 1972-76

Honda CB Shock Absorber Set ~ Stock Design ~ CB750K 1972-76

$179.95 USD
73-1055
Replace your shocks with this Stock Type Designed Shock Absorber Set, chrome body with chrome springs and chrome center. Modelled after the original stock...
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...
Honda CB750 CB700 CB650 CB550 shock absorber set stock design 1969-71

Honda CB Shock Absorber Set ~ Stock Design ~ CB750K 1969-71

$189.95 USD
73-0153
Restore your CB750 stance with this Stock Type Designed Shock Absorber Set. Chrome body with chrome springs and black center, modeled after the original...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB black and chrome 335mm stock length shock absorber set

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1986 Honda CB700SC · Shock Mounting Washers Buying guide

Check mounting washers before planning a complete shock change

Honda’s original 1986 CB700SC shock assembly has an eye at each end. Several broadly listed replacement shocks instead use a lower clevis. Match this basic attachment design before considering length, bushings or appearance.

Parts to consider

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000 Shock mounting washerSold individually; OEM-type washer replacing 90521-292-000. Two are specified per motorcycle.Voir la pièce

Order the confirmed washer quantity

The washer listing supplies one OEM-type replica replacing 90521-292-000. Two are used per motorcycle, so order two when renewing both specified mounting washers. Inspect the bushings and remaining hardware separately.

Do not borrow a different Honda’s shock geometry

The catalog’s 335 mm and 336 mm eye-to-clevis shock sets have a different lower fitting from Honda’s original CB700SC eye-to-eye assembly. The 290 mm eye-to-eye custom set shares the broad mounting type, but its length and 10 mm bushing specification still need separate confirmation. None of those descriptions establishes original CB700SC ride height.

Buying questions

Can an eye-to-clevis shock replace the original CB700SC shock?

It is not a verified direct replacement. Honda’s assembly has upper and lower eyes, while a clevis has two forked mounting ears. A washer kit or a stock-length title does not resolve that different lower attachment.

Does the manual’s shock-spring length identify replacement shock length?

No. Spring free length measures the removed spring. Replacement-shock length is measured between its mounting centers. Keep those measurements separate and obtain a confirmed eye-to-eye application before choosing a complete shock.

Should chain-clearance advice determine a CB700SC shock purchase?

The stock CB700SC uses shaft final drive. Generic chain-angle advice from a universal shock listing does not establish compatibility; the mounting design, intended geometry, suspension travel and surrounding clearance still need CB700SC-specific confirmation.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB700SC

Votre panier

×