VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB700SC — Guidon et commandes

Choose the handlebar grips for your 1986 CB700SC around the controls already fitted. Both black rubber replicas are 130 mm long for a 7/8-inch bar application. Compare the throttle sleeve, available length and bar-end arrangement before selecting open or closed ends.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1986 Honda CB700SC · Handlebar Grip Selection Buying guide

Choose grip ends after checking the control space

The two grip choices share their stated length and bar application. Their end treatment differs, so compare the existing bar ends and accessories before choosing the finish for the fitted controls.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack rubber OEM-type grips for 7/8-inch handlebars, 130 mm long, with closed ends.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica gripsBlack rubber OEM-type grips for 7/8-inch handlebars, 130 mm long; end plugs included.Voir la pièce

Choose the end treatment deliberately

The closed-end version provides a closed rubber finish, while the open-end grips include plugs. Compare the existing bar-end fittings before buying. An open grip does not itself identify the hardware or clearance needed by every aftermarket weight or bar-end accessory.

Check the operating control underneath

The 130 mm grips must fit the throttle sleeve and clear the existing bar ends. After any control or handlebar changes, Honda requires the wires, hoses and cables to remain free through all steering positions. Check that the new grip and end arrangement does not obstruct throttle return.

Buying questions

Does 7/8-inch bar fit mean the right grip goes directly on bare metal?

No. The right-hand grip fits over the throttle sleeve. Check that sleeve’s condition and the available 130 mm grip space, as well as the clearance at the outer end, before choosing either end style.

Are these genuine Honda-manufactured grips?

They are described as OEM-type replicas. The references identify the intended style and application, while that manufacture distinction should remain clear when choosing them for the restoration.

Can a bar-end accessory be accepted just because the grip is open-ended?

No. Its mounting system and clearance must be checked independently. The grip opening does not verify the accessory attachment, and the finished arrangement must leave the throttle free to return throughout the steering range.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB700SC

Votre panier

×