VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB750K — Pistons et segments

Compare piston kits and piston rings for the 1970 Honda CB750K, with standard and oversize choices for different rebuild requirements. Cylinder measurements determine the size; the product contents determine the rest of your order. Similar-looking kits can include rings or clips differently.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pistons et segments

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

$1.95 USD
05-7201
Secure your piston pins with this 2-pack of 15mm Piston Pin Clips, Japanese made to superior quality and replacing OEM Ref. #94601-15000. Exceptionally broad...
Honda CB750 standard piston ring set 13011-300-024

1969-76 Honda CB750 Piston Ring Set ~ Standard Size

$27.95 USD
05-7000
Refresh your early CB750's top end with this Standard Size Piston Ring Set, Japanese made to superior quality and replacing OEM Ref. #13011-300-024. Built...
Honda CB750 CB650 CB550 tappet adjuster screw and nut set 90012-426-000

Honda CB Tappet Adjuster Screw & Nut Set ~ Replaces 90012-426-000

$4.61 USD
49-0784
Replace your tappet adjuster screws and nuts with this Tappet Adjuster Screw & Nut Set. Each set includes one tappet adjuster screw and one...
Honda CB750K cylinder dowel pin (12X15MM) 94301-12150

1969-75 Honda CB750K Cylinder Dowel Pin (12x15mm)

$4.53 USD
29-7015
Replace your cylinder dowel pins with this Cylinder Dowel Pin, 12 x 15mm size, replacing OEM #94301-12150.Sold each, order the quantity you need.Key Features•...
Honda CB750 1ST oversize piston ring set +0.25mm 13021-300-024

1969-76 Honda CB750 Piston Ring Set ~ 1st Oversize +0.25mm

$27.95 USD
05-7001
Bore your early CB750 up 0.25mm with this 1st Oversize Piston Ring Set (+0.25mm). Japanese made to superior quality, replacing OEM Ref. #13021-300-024. Fits...
Honda CB750K cylinder dowel pin (12X22MM)

1969-75 Honda CB750K Cylinder Dowel Pin (12x22mm)

$3.50 USD
29-7014
Replace your cylinder dowel pins with this Cylinder Dowel Pin, 12 x 22mm size, replacing OEM #94301-12220.Note: 2 used per bike, order the quantity...
Honda CB piston pin 13111-300-000

Honda CB Piston Pin ~ Replaces 13111-300-000

$8.95 USD
05-7200
Replace a worn or damaged piston pin with this Piston Pin, Japanese made to superior quality and replacing OEM Ref. #13111-300-000. Fits the full...
Épuisé
Honda CB750 engine rebuild stand for Honda CB750 SOHC

1969-78 Honda CB750 Engine Rebuild Stand ~ For Honda CB750 SOHC

$144.95 USD
73-1162
Streamline your engine rebuild with this high-quality CB750 SOHC Engine Rebuild Stand. Built to handle the weight and shape of the Honda CB750 SOHC...
Honda CB750 1ST oversize piston kit +0.25mm 13102-300-030

1969-76 Honda CB750 Piston Kit ~ 1st Oversize +0.25mm

$69.95 USD
05-7101
Take your early CB750K cylinders to a 0.25mm oversize bore with this 1st Oversize Piston Kit (+0.25mm). Japanese made to superior quality, replacing OEM...
Honda CB750 standard piston kit 13101-300-030

1969-76 Honda CB750 Piston Kit ~ Standard Size

$69.95 USD
05-7100
Rebuild one cylinder of your early CB750K with this Standard Size Piston Kit, Japanese made to superior quality and replacing OEM Ref. #13101-300-030. Kit...
Nouveau
Honda CB750F CB750K standard size piston kit includes piston, rings and pin japanese made superior quality

1969-76 Honda CB750F / CB750K Standard Size Piston Kit ~ Includes Piston, Rings & Pin ~ Japanese Made Superior Quality

$89.95 USD
99-5152
Upgrade or restore your classic Honda motorcycle engine with this Standard Size Piston Kit — Japanese made with superior quality components. This kit includes...
Honda CB750 2ND oversize piston ring set +0.50mm 13031-300-024

1969-76 Honda CB750 Piston Ring Set ~ 2nd Oversize +0.50mm

$27.95 USD
05-7002
Go with a 0.50mm over-bore refresh using this 2nd Oversize Piston Ring Set (+0.50mm), Japanese made to superior quality and replacing OEM Ref. #13031-300-024....
Nouveau
Honda CB750F CB750K piston kit with piston rings and pin 2ND oversize 0.50mm

1969-76 Honda CB750F / CB750K Piston Kit with Piston Rings and Pin ~ 2nd Oversize 0.50mm

$89.95 USD
99-5443
Bring your engine back into proper running condition with this 2nd Oversize (0.50mm) Piston Kit, manufactured in Japan for superior quality and reliable performance....
Nouveau
Honda CB750F CB750K piston kit with piston rings and pin 1ST oversize 0.25mm

1969-76 Honda CB750F / CB750K Piston Kit with Piston Rings and Pin ~ 1st Oversize 0.25mm

$89.95 USD
99-5433
Bring your engine back into proper operating condition with this 1st Oversize (0.25mm) Piston Kit, manufactured in Japan for superior quality and precise fitment....
Honda CB750 2ND oversize piston kit +0.50mm 13103-300-030

1969-76 Honda CB750 Piston Kit ~ 2nd Oversize +0.50mm

$69.95 USD
05-7102
Go with a 0.50mm oversize on your early CB750K using this 2nd Oversize Piston Kit (+0.50mm). Japanese made to superior quality, replacing OEM Ref....
Comparer

1970 Honda CB750K · Pistons & rings Buying guide

Match piston size and compare rings, pins and clips

Two standard piston kits can supply different combinations of rings and clips. Confirm the required cylinder size first, then compare the included pieces and the number of pistons covered by each listing.

Parts to consider

1969-76 Honda CB750F / CB750K Standard Size Piston Kit ~ Includes Piston, Rings & Pin ~ Japanese Made Superior Quality Standard piston kit with ringsOne standard-size piston, rings and pin. Pin clips are not included and must be ordered separately.Voir la pièce 1969-76 Honda CB750 Piston Kit ~ Standard Size Standard piston kit with clipsOne standard-size piston with pin and a pair of clips; rings are not included.Voir la pièce 1969-76 Honda CB750F / CB750K Piston Kit with Piston Rings and Pin ~ 2nd Oversize 0.50mm Second oversize piston kit with ringsOne +0.50mm piston with matching rings and pin. Clips are separate; confirm the required size before ordering.Voir la pièce

Pièces connexes : Standard-size rings for one piston · First oversize piston ring set · 15mm pin clip pair

Measure the bore before choosing standard or oversize

Honda specifies a 61mm bore for the original CB750 engine. A previous rebuild may have changed that size, so have the present cylinders and pistons measured before ordering standard, +0.25mm or +0.50mm parts.

Match the rings to the piston as well as the bore

Record the piston maker, size and ring-groove requirements before ordering separate rings. A standard-size label does not establish compatibility with every aftermarket piston. Have the machinist confirm the piston manufacturer’s required clearance and the correct rings for the measured, finished bore before choosing standard or oversize parts.

Common questions

Why are there two standard piston kits?

Their contents differ. One includes rings and excludes clips; the other includes clips and excludes rings. Both are listed for one piston. Compare the package with the separate parts you already have or intend to purchase.

What should be measured before ordering replacement rings?

Have each bore checked for diameter, taper and out-of-round, and have the piston grooves and the proposed ring end gaps assessed. Match the rings to the fitted piston and finished bore. Use the piston and ring maker’s specifications rather than applying one assumed clearance to every replacement kit.

Should I order oversize rings to suit cylinder wear?

Have the cylinder and piston requirements assessed before ordering. An oversize ring listing names a specific size; it must match the piston and cylinder combination selected for the rebuild, rather than simply compensate for an unmeasured wear concern.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB750K

Votre panier

×